ATD ATD-7431 - Manual
ATD ATD-7431 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SaFetY and GeneraL inFOrMatiOn; PrOdUct deScriPtiOn; SPeciFicatiOnS
- Page 3 – PreParatiOn
- Page 4 – OPeratiOn; WARNING
- Page 6 – rePLaceMent PartS
- Page 8 – One Year LiMited WarrantY
Model Atd-7430
Series A
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
!
!
advertencia
• Leer, comprender, y seguir las instrucciónes antes
de utilizar el aparato.
• El manual de instrucciónes y la información de
seguridad deben estar comunicado en lengua del
operador antes del uso.
• No seguir estas indicaciónes puede causar daños
personales o materiales.
!
WARNING
To avoid
crushing and related injuries
:
never
work on, under or around a
load supported only by a hydraulic
jack.
immediately
transfer the load to
an appropriate work station.
U.S. Patent NO. 5,341,723
Hydraulic
transmission
Jack
Model number
atd-7430
atd-7431
Operating Instructions & Parts Manual
capacity
1000 lbs
1000 lbs
Series a
(air actuated Model)
OIPM#7430-1010
Printed in China
Atd Tools Inc.
160 Enterprise Drive, Wentzville, MO 63385
Series a
Model Atd-7431
Series A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 SaFetY and GeneraL inFOrMatiOn Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack before using. The owner and operator of this equipment shall have an understanding of this jack and safe operating procedures before attempting to us...
3 PreParatiOn assembly (refer to Figure 1) Tools required: 1/2" box end wrench, 19mm wrench, 3/8" hex socket & torque wrench.1. Three major parts should be included in the package: (a) Hydraulic unit Assembly; (b) Saddle Assembly; (c) 2 pieces of base half with hardware. 2. Attach either...
OPeratiOn Follow the instruction for removal and installation of transmission, transfer case or transaxle according to the vehicle manufacturer's service manual. raise saddle assembly: Pump foot pedal or press air pump pedal (Model Atd-7431 Series A) until saddle reaches desired position. Secure loa...
