ATD Atd-7328 - Manual
ATD Atd-7328 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PreParatiOn; SaFetY and GeneraL inFOrMatiOn; PrOdUct deScriPtiOn
- Page 3 – SPeciFicatiOnS
- Page 4 – WARNING; OPeratiOn
- Page 7 – One Year LiMited WarrantY
- Page 8 – Notes
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
!
!
advertencia
• Leer, comprender, y seguir las instrucciónes antes
de utilizar el aparato.
• El manual de instrucciónes y la información de
seguridad deben estar comunicado en lengua del
operador antes del uso.
• No seguir estas indicaciónes puede causar daños
personales o materiales.
!
WARNING
To avoid
crushing and related injuries
:
never
work on, under or around a
load supported only by a hydraulic
jack.
aLWaYS
use adequately rated
jack stands.
U.S. Patent No's. 5,341,723 • 5,946,912
air / Hydraulic
axle Jack
Model number
atd-7322
Series a
atd-7328
Operating Instructions & Parts Manual
capacity
22 ton
22 ton
OIPM#7322-0310 rev
Printed in China
Atd Tools Inc.
160 Enterprise Drive, Wentzville, MO 63385
Model Atd-7322 Series A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 PreParatiOn assembly (see Replacement Parts page 6 for reference to parts location & assembly sequence) Assemble, align and insert the handle assembly and handle position bar into the handle sleeve, then tighten the bolt on handle sleeve to prevent accidental removal of handle while in use. Be...
3 SPeciFicatiOnS Model Capacity Jack Size (L x W) Min. Height Max. Height Hyd. Range Extension Screw Atd-7322 Series A 22 Ton 22-7/8" x 12-1/2" 9-3/4" 19-1/4" 5-5/8" 3-7/8" Atd-7328 22 ton 8-1/4" 16-3/4" 4-5/8" Figure 1 - Typical Truck Jack Nomenclature (Model Atd...
4 ! Be sure all tools and personnel are clear before lowering load. Slowly open the release valve! The more you turn the handle knob counter-clockwise, the faster the load will come down. Maintain control of the rate of speed at which the load lowers at all times! 1. Raise load high enough to clear ...
