ATD ATD-7024 - Manual
ATD ATD-7024 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
ATD-7024
11
PC.
DISC
BRAKE
CALIPER
KIT
O
PERATING
I
NSTRUCTIONS
1) Jack up the car and support on axle stands, then remove the relevant road wheel
2) Remove the caliper from its carrier and take out the brake pads
3) Fit the main body of the wind back tool into the caliper; turn the main thrust bolt clockwise to
compensate for the distance between the piston and the caliper body.
4) Select the correct adapter and fit it into the end of the main thrust bolt. Continue rotating the
thrust bolt clockwise until the pegs of the adapter are centered and correctly located into the
mating recesses in the piston.
5) Turn the thrust bolt to wind the caliper piston back into the housing.
6) Fit the new brake pads and bolt the caliper back on to the carrier.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
