ATD ATD-6810 - Manual
ATD ATD-6810 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Preparation; WARNING
- Page 3 – Maintenance
- Page 4 – Troubleshooting
ATD-6810
SPRAY GUN W/CUP
INSTRUCTION MANUAL
Read this Instruction Manual carefully and understand it completely, basic precaution
should be strictly followed to prevent the damage to the tool and injury to the operator.
Retain this manual for further reference. And you should pay more attention to the
Technical Data.
Description
A High pressure spray gun is ideal for refinishing a classic car or a wide variety of home improvement
projects. This high pressure paint sprayer features air, fluid and fan controls to offer a wide variety of patterns.
It is supplied with a 1000 cc suction feed aluminum cup.
Technical Data
Type of Feed: Suction
Air Inlet: 1/4”
Standard Diameter of Nozzle:
φ
2.0mm
Optional Diameter of Nozzle:
φ
1.5~2.5mm
Recommended air pressure: 3.0~ 4.0 bar (45-60psi)
Max. Pressure of air: 8.3 bar (120psi)
Paint Capacity: 1000cc
Avg. Air Consumption: 170-250l/min (6.0-8.8cfm)
Pattern Width: 180-230mm (7.1-9.1”)
Weight: 1.1kgs (2.42lbs)
A-weighted sound pressure level: 77.1dB(A)
Sound power level: 88.1dB(A)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Important Safety Instructions 1. For toxic vapors produced by spraying certain materials can create intoxication and serious damage to health. Always wear safety glasses, gloves and respirator to prevent the toxic vapor hazard, solvent and pointing paint coming into contact with your eyes or skin. 2...
Adjustment The desired pattern, volume of fluid output and fine atomization can easily be obtained by regulating the Pattern Adjusting Knob, Fluid (PAINT) Adjusting Knob and Air Adjusting Knob. Adjusting pattern: Turning the Pattern Adjusting Knob to the right until tight will make spray pattern rou...
Storing z When not using spray gun, turn the fluid adjustment knob counter-clockwise to open which will reduce spring tension on needle fluid tip. z Spray gun MUST BE well cleaned and lightly lubricated. Troubleshooting Symptom Problems Solution Fluttering or spitting 1. Material level too low. 2. C...
