ATD ATD-5495 - Manual
ATD ATD-5495 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – DO NOT REVERSE CLAMPS.
- Page 3 – COLD TEMPERATURE EFFECTS; Load Test
- Page 4 – STARTER MOTOR TEST; seconds, this test will not be available.; STARTER TEST TABLE; too small for the vehicle'’ requirements.
- Page 5 – BAD CELL INDICATORS
- Page 6 – CHARGING SYSTEM TEST; Turn off all electrical accessories and run vehicle at 1500 R.P.M.
ATD-5495
INSTRUCTION
MANUAL
(12 VOLTS)
AUTOMOBILE
BATTERY
CHARGING SYSTEM
STARTER MOTOR
TESTER
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
BASIC BATTERY LOAD TEST (Conventional & Maintenance Free types) This test evaluates the battery’s ability to crank an engine. The tester draws current from the battery while measuring its voltage level. Batteries generate explosive gasses, which can be ignited by a spark or open flame. Work area...
COLD TEMPERATURE EFFECTS Because of the battery’s chemical nature, it will test lower when cold than when warm. For most accurate results, this effect should be compensated for when the battery’s internal temperature is below 40 ° F. Assume internal battery’s internal temperature to be the day’s h...
STARTER MOTOR TEST This test identifies excessive starter current draw, which makes starting difficult and shortens battery life. Perform battery load test and proceed only if the battery tests good. Engine should be at normal operating temperature. 1. Connect clamps to battery posts and run the bas...
