ATD ATD-5218 - Manual
ATD ATD-5218 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PRESSURE RELIEF PROCEDURE; INSPECTION INSTRUCTIONS
- Page 3 – AVAILABLE MODELS
- Page 4 – FIGURE “A” ADJUSTING; ROD MAY PROTRUDE; REPAIR PARTS
ATD-5218
MADE IN MEXICO GREASE CONTROL VALVE
FOR AIR OPERATED CHASSIS PUMP
MAXIMUM RATED PRESSURE – 7500 PSI
INLET: 1/4”; Includes Extension Tube and High Pressure
Zerk Coupler
OWNERS MANUAL
RETAIN THIS MANUAL FOR FUTURE REFERENCE TO IMPORTANT WARNINGS AND
OPERATING AND MAINTENANCE INSTRUCTIONS.
PROPER USE AND MAINTENANCE OF THIS EQUIPMENT IS THE RESPONSIBILITY OF THE
OWNER AND/OR OPERATOR.
DO NOT USE THIS EQUIPMENT UNLESS YOU HAVE CAREFULLY READ AND
UNDERSTAND THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL.
! WARNING !
NEVER
exceed the stated maximum working pressure of the pump or of the lowest rated component in your
system.
NEVER
modify any part of this equipment.
NEVER
use combustible gas with this equipment.
NEVER
attempt repairs while the system is under pressure.
NEVER
attempt to disassemble the equipment while the system is under pressure.
ALWAYS
tighten fluid connections before using this equipment
ALWAYS
read/follow the fluid manufacturer’s recommendations regarding fluid compatibility.
ALWAYS
read/follow the fluid manufacturer’s recommendations regarding the use of protective clothing
and equipment.
ALWAYS
use an air line filter/moisture eliminator at the air inlet for the pump.
ALWAYS
use air line lubricator.
REGULARLY
check all equipment and repair/replace worn or damaged parts immediately.
FAILURE TO HEED THESE WARNINGS INCLUDING OVERPRESSURIZING,
ALTERING PARTS, USE OF INCOMPATIBLE FLUIDS, MISUSE, OR USE OF
DAMAGED/WORN PARTS MAY RESULT IN EQUIPMENT DAMAGE,
PROPERTY DAMAGE, FIRE, EXPLOSION AND/OR SERIOUS PERSONAL
INJURY.
SAFETY INSTRUCTIONS
Extreme caution should be used when operating this equipment as it generates very high fluid pressure.
Leaks from loose or ruptured components or material from dispensing valve can inject fluid through the skin
causing serious bodily injury and possible need for amputation. Always wear protection to prevent material
splashing onto skin or into eyes.
IMPORTANT:
GET EMERGENCY MEDICAL CARE IMMEDIATELY IF ANY FLUID APPEARS TO
PENETRATE THE SKIN! INFORM PHYSICIAN OF EXACTLY WHAT WAS INJECTED. PLEASE
DO NOT TREAT THIS INJURY AS A SIMPLE CUT.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
! WARNING ! – RELIEF PROCEDURE DO NOT EVER point the dispensing valve at another person. DO NOT EVER attempt to stop material from the dispensing valve or a leaking connection with your hand or body. BEFORE EACH USE , check equipment for proper operation and to insure safety devices are in place and...
WARNING: AVOID INJURY: DO NOT COME IN CONTACT WITH ANY BODY PARTS WITH THE NOZZLE TO PREVENT INJURY AVAILABLE MODELS MODEL W/ ACC COUPLNG NUT INLET ATD5218 W/ 62028ME ATD5258 12869ME 1/4" NPT(F) LT82393ME W/O 62028ME ATD5258 12869ME 1/4" NPT(F) LT3050ME W/ 62028ME ATD5258 11396ME 3/8" NP...
TROUBLESHOOTING GUIDE FOR HIGH PRESSURE CONTROL VALVES Greases leaks out of the coupler ATD5258 when handle is not depressed. Clean ball 66255ME and Seat 11364ME; If seat is pitted on one side, reverse it. No Grease is pumped out of the coupler ATD5258 when handle is depressed Clean ball 66255ME and...
