ATD ATD-3700 - Manual
ATD ATD-3700 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Sensor with Filter; Product Specifications
- Page 3 – Operating Instructions
- Page 4 – Leak Size Indicator; regardless of the sensitivity; Low Battery Indicator; Maintenance; Audio Mute Function; Remove the plastic seal cap on top of the Leak Test Vial
RETURN FOR REPAIR POLICY
Every effort has been made to provide reliable, superior quality
products. However, if you have any problems with this unit
PLEASE call the 1-800 number listed below for troubleshooting
assistance before returning the product for repair or exchange.
In the event your instrument requires repair, you can forward the
unit to the Service Center freight prepaid to the address below with
return address, phone number and/or email address.
SERVICE CENTER
2651 W 81st Street
Hialeah, FL 33016
1-800-222-0956
WARRANTY POLICY
The ATD-3700 Refrigerant Gas Leak Detector is warranted to be
free of defects in materials and workmanship for a period of two
years from the date of purchase. This warranty applies to all
repairable instruments that have not been tampered with or
damaged through improper use including unauthorized opening of
the unit. Please ship warranty units that require repair freight
prepaid to Service Center along with proof of purchase, return
address, phone number and/or email address.
ATD TOOLS
www.atdtools.com
Model ATD-3700
Refrigerant Gas Leak Detector
User Manual
Detects all CFC, HFC, HCFC
Refrigerants including blends
Certified
SAE J1627
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
INTRODUCTION The ATD-3700 features a long life heated sensor technology that is designed to detect the more current and difficult HFC refrigerants such as R-134a in addition to all HCFC (R22) and CFC (R12) refrigerants including SNAP approved hydrocarbon blends. The ATD-3700’s unique digital leak si...
Maintenance Filter Keyway alignment Pull straight out (do not twist) to remove sensor Unscrew tip to replace filter Push straight on (do not twist) to install sensor Batteries: Install Batteries : Remove screw located at rear end of unit and pull down hinged battery door to open as shown. Insert pos...
Leak Size Indicator The digital leak size indicator remains off normally but once a leak is detected, a number from 1-9 will be displayed for all HFC and HCFC refrigerants regardless of the sensitivity setting. The number will continue to increase or decrease depending on the amount of refrigerant s...
