ATD ATD-36750 - Manual

ATD ATD-36750

ATD ATD-36750 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
Page: / 6

Table of Contents:

  • Page 2 – INTRODUCTION; FEATURES
  • Page 3 – Operating Instructions; Press the ON/OFF button once to turn on and again; WARM UP; : The detector automatically starts heating the; READY; : The detector is ready to begin searching for leaks; UV Light Power On/Off
  • Page 4 – Before leak checking with the UV light:; UV LED’s; Item; RETURN FOR REPAIR POLICY; WARRANTY POLICY
  • Page 5 – Product Specifications; Leak Size Indicator; regardless of the sensitivity; Low Battery Indicator; Maintenance; Audio Mute Function
  • Page 6 – Polarity Mark; to remove
Loading the manual

Model ATD-36750

Refrigerant Gas Leak Detector

User Manual

Detects all CFC, HFC, HCFC, HFO

Refrigerants including blends

Design certified by

ASCI and Intertek to

meet SAE J2791,

J2913 & EN14624

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - INTRODUCTION; FEATURES

INTRODUCTION The ATD-36750 features a patented 3 LED UV that emits the optimum wavelength for A/C dye fluorescence. The UV light can be used simultaneously with the heated sensor or independently. The D440A-UV does not require rechargeable batteries. The ATD-36750 features a long life solid electrol...

Page 3 - Operating Instructions; Press the ON/OFF button once to turn on and again; WARM UP; : The detector automatically starts heating the; READY; : The detector is ready to begin searching for leaks; UV Light Power On/Off

NOTES: 8 Operating Instructions 1. TURN ON: Press the ON/OFF button once to turn on and again to turn off. NOTE: Hold button down for approximately 1 second to turn unit off. 2. WARM UP : The detector automatically starts heating the sensor. During the heating cycle, the digital leak size indicator ...

Page 4 - Before leak checking with the UV light:; UV LED’s; Item; RETURN FOR REPAIR POLICY; WARRANTY POLICY

UV Light Operation Before leak checking with the UV light: (a.) Make sure the A/C system is properly charged with sufficient dye. (See manufacturer’s specifications for proper dye charge.) (b.) Run the A/C system long enough to thoroughly mix and circulate the dye with the refrigerant and lubricatin...

Other ATD Models

All ATD Other