ATD ATD-3060 - Manual
ATD ATD-3060 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
ATD-3060
11 PC LOCKING WHEEL NUT REMOVER
INSTRUCTION MANUAL
1. Position socket over lock to be removed
2. Insert socket installing driver into center broach and drive socket onto lock by firmly hitting driver with large hammer.
3. Remove socket with 1/2” extended driver or breaker bar
NOTE:
SOCKET INSTALLING DRIVER MUST BE USED TO SET THE SOCKET ON THE NUT. HAMMERING THE ENDS OF THE SOCKET
WILL DAMAGE THE TOOL AND VOID THE WARRANTY.
NOTE:
Use EXTRACTOR PUNCH to knock the lock out of the socket.
1. Position socket over lock to be removed
2. Insert socket installing driver into center broach and drive socket onto lock by firmly hitting driver with large hammer.
3. Remove socket with 1/2” extended driver or breaker bar
NOTE:
FOR AFTERMARKET STYLE WHEEL LOCKS, IT MAY BE NECESSARY TO USE A 1/2" DRIVE IMPACT GUN WITH EXTENSION TO
SPIN THE SOCKET OVER THE LUGNUT TO BE REMOVED FOR ABOUT 5 SECONDS AT HIGH SPEED IN A COUNTER-CLOCKWISE
DIRECTION. REMOVE THE IMPACT GUN AND RESET THE SOCKET WITH THE DRIVER. REPLACE THE IMPACT GUN AND, AT HIGH
SPEED, SPIN THE LOCK OFF IN A COUNTER-CLOCKWISE DIRECTION.
NOTE:
SOCKET INSTALLING DRIVER MUST BE USED TO SET THE SOCKET ON THE NUT. HAMMERING THE ENDS OF THE SOCKET
WILL DAMAGE THE TOOL AND VOID THE WARRANTY.
NOTE:
Use EXTRACTOR PUNCH to knock the lock out of the socket.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
