ATD ATD-2150 - Manual
ATD ATD-2150 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – FaiLure tO OBServe tHeSe WarNiNGS COuLD re SuLt iN iN Ju ry.
- Page 3 – Operating Instructions • Warning Information • Parts Break down; Operating instructions...
- Page 4 – Heavy Duty Air Hammer
ATD-2150
- 1 -
Rev. 3/19/09
Heavy Duty air Hammer
atD-2150
Blows Per Minute . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4,300 BPM
Bore Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4"
Piston Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.7"
Air Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4"-18 NPT
Hose Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8" I.D.
Rec. Air Pressure . . . . . . . . . . . . . . . . . . . . . . . . 90 psig (6.2 bar)
Avg. Air Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . 4.12 cfm
Sound Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 dBA
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.1"
Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 Lbs.
S P e C i F i C a t i O N S
Some dust created by power
sanding, sawing, grinding, drilling,
and other construction activities
contains chemicals known to cause
cancer, birth defects or other
reproductive harm. Some examples
of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks
and cement and other
masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures
varies, depending on how often you
do this type of work. To reduce your
exposure to these chemicals: work
in a well ventilated area, and work
with approved safety equipment,
such as those dust masks that are
specially designed to filter out
microscopic particles.
AlwAYS reAd
inSTrucTionS
before uSing
power ToolS
• ALWAYS WEAR APPROVED EAR
And eYe proTecTion.
• ALWAYS OPERATE AT MAX. AIR
preSSure of 90 pSig, 6.2 bAr.
• REPETITIVE MOTION/EXTENDED
EXPOSURE TO VIBRATION MAY
HARM HANDS/ARMS.
This insTrucTion Manual
conTains iMporTanT
safeTy inforMaTion
read carefully and
undersTand all
in for Ma Tion
BeFOre
operaTing This Tool!
save This Man u al
for fuTure ref er ence.
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
ATD-2150 - 2 - Rev. 3/19/09 • Place the tool on the work before starting the tool. Do not point or indulge in any horseplay with this tool. • Slipping, tripping and/or falling while operating air tools can be a major cause of serious injury or death. Be aware of excess hose left on the walking or wo...
ATD-2150 - 3 - Rev. 3/19/09 Operating Instructions • Warning Information • Parts Break down Nipple air Supply... Tools of this class operate on a wide range of air pres sures. It is recommended that air pres sure of these tools mea sures 90 PSI at the tool while running free. Higher pres sure (over ...
ATD-2150 - 4 - Rev. 3/19/09 atD-2150 Heavy Duty Air Hammer Ref. No. Part No. Description Qty. 1 * Housing 1 2 ** Rear End Plate 1 3 ** Valve Plate 1 4 ** Set Pin 2 6 ** Front End Plate 1 7 RS12015SH Piston 1 8 RS32008C Cylinder 1 9 ATD2052 Quick Change Retainer 1 10 * Trigger Sleeve 1 11 * Spring 1 ...
