ATD ATD 109 - Manual

FEATURES

♦

Audible click and/or impulse when torque setting is

reached.

♦

+/- 4% clockwise accuracy between 20% and 100% of

range. Complies with:

−

American Standard ANSI/ASME B107.14M

−

International Standard ISO 6789

♦

Large easy to read torque scale.

♦

Ball bearing mechanism provides extended calibration

accuracy.

♦

Anodized aluminum handle with no-slip diamond knurl.

♦

Detent style adjustment locking prevents accidental

change of torque setting.

♦

Chrome plated, hardened steel body.

♦

Factory calibration tape supplied with each tool.

♦

Packaged in protective blow molded storage case.

SUGGESTIONS

Proper use of this professional torque wrench will give you

complete satisfaction in its performance and reliability.

Following are some helpful tips:

1. Accuracy is assured by gripping the wrench properly.

Grasp the GRIP, not the SHAFT, and pull smoothly.

2. Each torque wrench is lubricated before leaving the factory.

If it has not been used for some time, it should be operated

several times to re-distribute the lubricant within the working

mechanism.

3. Never attempt to turn the KNOB when the KNOB is in the

"LOCK" position.

4. Never set for higher or lower torque values than those

indicated on your wrench.

5. For greater accuracy, clean all thread surfaces and remove

any burrs on the fasteners being used.

6.

WARNING

-never use your torque wrench to apply more

torque than its rated capacity.

7. It is not necessary to return this wrench to its lowest

calibrated value after use unless it is to be stored for an

extended period of time.

DO NOT OVERTORQUE

CERTIFICATION

This torque wrench was calibrated prior to shipment from the

factory within tolerance limits of +/- 4% clockwise (right-handed)

accuracy of upper 80% of range

LIMITED WARRANTY

Until one year from the date of purchase, we will repair any

defect in material or workmanship free of charge. Improper use

of these products, including but not limited to the application of

excessive force, will affect performance and may result in

injury. The warranty does not apply to wrenches which do not

function properly or within specified accuracy because of wear,

improper or unreasonable use, damage not resulting from

defect or malfunction, or which have been altered. Calibration is

warranted for 90 days.

This warranty gives you specific legal rights, and you may also

have other rights which vary from state to state.

For repair or calibration send wrench, postage prepaid, to:

IN THE U.S.A.

Angle Repair & Calibration

175 Angle Drive

Beckley, WV 25801

972-864-6762

IN CANADA

REVISED/PRINTED IN USA APR 2014 FORM CT600-61D

ATD-109

MICROMETER

ADJUSTING

TORQUE

WRENCH

OPERATING

INSTRUCTIONS

ATG Torque Repair

7631 Bath Road

Mississauga, ON L4T3T1

1-866-691-6212