ATD ATD-10535 - Manual
ATD ATD-10535 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – ADDITIONAL SAFETY INSTRUCTIONS
- Page 3 – ELECTRICAL SAFETY; OPERATION; Switching on
- Page 4 – • Clamp material well. Do not support the work piece with hand or foot.; PLUNGE CUTTING; • Place the saw onto the work piece and switch it on.; FLUSH SAWING
ATD-10535
7 AMP Variable Speed Reciprocating Saw
Owner’s Manual
Manufactured in China
To ATD Tools, Inc. Specifications
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
TECHNICAL SPECIFICATIONS Voltage: 120V Frequency: 60Hz Power input: 7 Amps No load speed: 600-2400/min Max. Cutting thickness: 5.9'' Stroke length: 1-3/16'' Weight: 8.8 lbs Lpa (sound pressure level): 90.2dB(A) Lwa (sound pressure capacity): 103.2dB(A) Vibration value: 10,675 m/s PRODUCT INFORMATION...
IMMEDIATELY SWITCH OFF THE TOOL IF THE FOLLOWING CONDITIONS EXIST: • Excessive sparking of the carbon brushes in the collector. • Interruption in the main power, main lead or main lead damage. • Switch is faulty. • Smoke or smell of scorched or burnt insulation. ELECTRICAL SAFETY Always check that t...
ADJUSTING THE FOOT PLATE ANGLE • To allow the foot plate to securely rest on the work piece, the angle of the footplate can be adjusted as shown in the diagram. • The footplate can also be extended by loosening the two footplate length adjustment screws using the 4 mm hexagon key and then pulling th...
