ATD 8641 - Manual
ATD 8641 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Hub Tool Instructions
1.
1999 Ford F-350 Pickup
Crew Cab Diesel 7.3 LTR
4.
Put two screws in as
shown. Push in to release
tension spring.
3.
Remove manual locking
hub (This is a Warner Hub
Assembly).
2.
Remove lug nuts and
wheel.
5.
Remove spring clip.
8.
The hub is now removed.
7.
Pull the hub out.
6.
Remove snap ring from
axle shaft.
9.
Remove caliper and caliper
mount.
12.
Remove the nuts holding
the bearing assembly. The
nuts are 21 mm thin wall
socket.
11.
Remove the brake rotor.
10.
Support caliper to protect
brake hose using a bungee
cord or set on leaf spring.
13.
Turn steering wheel to the
right and tap on the tool. Turn
back to the left and tap again.
Go back and forth until the
bearing is removed.
16.
The U-joint had to be
turned out.
15.
When using either the
Dodge attachment, or the
Hub Tool alone, if the tool will
not thread on, turn the axle to
reposition the U-joint, then it
will thread on.
14.
Bearing assembly.
17.
Reinstalled.
Ford and Dodge 4WD Hub Tool
ATD-8641
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
