Asus WL-530 - Manual
Asus WL-530 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
此快速設定指南尊為
PCCW
而設計
ASUS – User Guide / Bunny / 1-3-2005
Page. 1
ASUS WL-530 Quick Connection Set Up Guide
Version 1.2
A. Installing WL-530G Router
＊
CAUTION: Please don’t connect power before
installation.
Attach the provided Wireless Antenna to the WL-530G’s
Router, then use the network cable in NETVIGATOR’s
Internet Service Provider and connect it to the WL-530G’s
"WAN" port, then plug on the power.
Then you can start to reset the WL-530G.
How to reset the WL-530G Router
To reset the router, you need to press the “restore” button
which at the back of the router, please press it for 5
second, and then you will see the “pwr” led it start to flash.
Then please release the button to let the router reset.
The router will be ready after reset around 30 second.
You Can use the wired or wireless computer to connect
the router. After reset, the SSID (wireless network name)
of the WL-530G is “default”.
For wireless computer, please connect to the “default”
network, and start the Section B.
B. WL-530G Encryption Setup
Step 1.
In the Internet Explorer address bar, enter
http://192.168.1.1
, then enter user “admin” password as
“admin”, then click OK to log on.
Step 2.
Click ‘Yes’ for Quick Setup.
Step 3.
Select your time zone and the closest region. For Hong
Kong - GMT +08:00 China Coast, Hong Kong. Click
“Next” to continue.
Step 4.
Please select "ADSL connection that requires username
and password. It is known as PPPoE" then click “Next” to
continue.
Step 5.
In the “Set your Account to ISP” page, input your
broadband username and password, then click “Next” to
the next page directly.
Step 6.
On the “Configure Wireless Interface” WEP Key default
page; suggest using WEP-64bits for security level. If
Security Level WEP-64bits is selected, please enter a
ten-digit password on the “WEP Key 1 (10 or 26hex
digits)” and click “Finish” to finish the setup.
P.S.
WEP key only accept HEX in ASUS router.
( 0 – 9 , A – F only.)
(Use WEP-64bits Key: 2627F68597 as shown)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
