Page 2 - ii; Table of contents; Setup; How to reconfigure; Specifications summary
ii Copyright © 200 8 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation ke...
Page 3 - iii; Notices; guidelines for energy efficiency.
iii Notices Federal.Communications.Commission.Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:• This device may not cause harmful interference, and• This device must accept any interference received including interference that may ca...
Page 4 - iv; Safety information
iv Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result ...
Page 5 - flicker disappears.
v Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or ...
Page 6 - Where to find more information; The ASUS websites worldwide provide updated information on ASUS
vi Where to find more information Refer to the following sources for additional information and for product and software updates. 1.. ASUS.websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2.. Optional.documentation ...
Page 7 - Package contents; CD; ASUS LCD Monitor; manual
1-1 1.1 Welcome! Thank you for purchasing the ASUS ® The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual 1.2 Package conte...
Page 8 - Chapter 1: Product introduction; Assembling the monitor base; connected successfully.; damage to the monitor.
1- Chapter 1: Product introduction 1.3 Assembling the monitor base To assemble the monitor base:1. Connect the base with the monitor. A click indicates that the base has been connected successfully. . Adjust the monitor to the angle that is most comfortable for you. We recommend that you cover the t...
Page 9 - Monitor introduction; Front of the LCD monitor; next; • The color definition of the power indicator is as the below table.
1-3 1.4 Monitor introduction 1.4.1 Front of the LCD monitor 1. button: • Automatically adjust the image to its optimized position, clock, and phase by long pressing this button for -4 seconds (for VGA mode only). • Use this hotkey to switch from five video preset modes (Game Mode, Night View Mode, S...
Page 11 - Status
4. Button: • Press this button to increase the value of the function selected or move to the previous fuction. • This is also a hotkey for Brightness adjustment. 6 . Power button • Press this button to turn the monitor on/off. 5. 7 . Power indicator • Automatica lly adjust the image to its optimized...
Page 12 - . This port connects PC audio source by the bundled audio; DVI port
1.4.2 Rear connectors of the LCD monitor 2 . Audio-in port . This port connects PC audio source by the bundled audio cable. ( O nly for some models) 1. AC-IN port . This port connects the power connector from the bundled power cord. 3 . DVI port . This 4-pin port is for PC (Personal Computer) DVI-D ...
Page 13 - Detaching the arm/stand; the below drawing shows.; The detachable stand of the
2. 1 Detaching the arm/stand (for VESA wall mount) VESA wall mount. To detach the arm/stand: . Remove the arm cover.2. Have the front of the monitor face down on a table. 3. Use a screwdriver to remove the three screws on the stand of the monitor as the below drawing shows. 4. Detach the arm from th...
Page 14 - Adjusting the monitor
2. 2 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle.• You can adjust the monitor’s angle fro...
Page 15 - Scenery Mode; Satuation; ASCR; sRGB
3- 3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure . Press the MENU button to activate the OSD menu. 2. Press and to navigate through the functions. Highlight and activate the desired function by pressing the MENU button. If the function selected has a sub-menu, press and again to navigate...
Page 16 - Chapter 3: General Instruction; Image; adjustment, the screen shows horizontal disturbances.; ASCR:Select YES or NO to enable or disable dynamic contrast
3-2 Chapter 3: General Instruction 2. Image You can adjust brightness, contrast, sharpness, saturation,position (VGA only), and focus (VGA only) from this main function. P1 • Brightness: the adjusting range is from 0 to 00. is a hotkey to activate this function. • • Sharpness: the adjusting range is...
Page 17 - and; ould
3-3 5. System Setup Allow you to adjust the system. • Volume: the adjusting range is from 0 to 00. is a hotkey to activate this function. • OSD Setup: adjusts the horizontal postition (H-Position) and the vertical position (V-Position) of the OSD. The adjusting range is from 0 to 00. In the OSD Time...
Page 21 - Supported Timing List; IBM Modes
3. 4 640x480 31.469 60Hz 25.175 640x480 37.861 72Hz 31.5 640x480 37.5 75Hz 31.5 800x600 35.156 56Hz 36 800x600 37.879 60Hz 40 800x600 48.077 72Hz 50 800x600 46.875 75Hz 49.5 1024x768 48.363 60Hz 65 1024x768 56.476 70Hz 75 1024x768 60.023 75Hz 78.75 1152x864 67.5 75Hz 108 1280x960 60 60Hz 108 1280x10...