Asus V6-M4A3000E- User Manual

Page 3 - Table of contents; Support DVD information

iii Table of contents Notices.......................................................................................................... viSafety.information...................................................................................... viiAbout.this.guide.........................................

Page 5 - Boot Settings Configuration

v Table of contents 4.6. Boot.menu................................................................................... 4-24 4.6.1 Boot Device Priority ...................................................... 4-24 4.6.2 Boot Settings Configuration .......................................... 4-25 4.6.3 Se...

Page 6 - Notices; may cause undesired operation.; REACH; substances in our products at ASUS REACH website at

vi Notices Federal.Communications.Commission.Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:• This device may not cause harmful interference, and• This device must accept any interference received including interference that may cau...

Page 7 - Safety information; VORSICHT; CLASS 1 LASER PRODUCT

vii Safety information Electrical.safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cab...

Page 8 - About this guide; Audience; This guide contains the following parts:

viii About this guide Audience This guide provides general information and installation instructions about the ASUS Vintage V-series M4A3000E barebone system. This guide is intended for experienced users and integrators with hardware knowledge of personal computers. How.this.guide.is.organized This ...

Page 9 - Where to find more information

ix Conventions.used.in.this.guide WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional inf...

Page 10 - System package contents

x System package contents Check your V-series M4A3000E system package for the following items. If any of the items is damaged or missing, contact your retailer immediately. Item.description 1. ASUS V-series M4A3000E barebone system with • ASUS motherboatd • Power supply unit • ASUS chassis 2. Cable ...

Page 11 - System; This chapter gives a general; Chapter 1

R System .introduction This chapter gives a general description of the ASUS V-series M4A3000E. The chapter lists the system features including introduction on the front and rear panel, and internal components. Chapter 1

Page 12 - supports the AMD; Front panel; are located at the front panel.

1-2 Chapter 1: System introduction 1.1 Welcome! Thank you for choosing the ASUS V-series M4A3000E!The ASUS V-series M4A3000E is an all-in-one barebone system with a versatile home entertainment feature.The system comes in a stylish casing and powered by the ASUS motherboard that supports the AMD ® A...

Page 14 - You may install an additional optical disk

1-4 Chapter 1: System introduction 1. Optical disk drive bay (empty). You may install an additional optical disk drive in this bay. 2.. Optical.disk.drive.eject.button. Press this button to eject the optical disk drive tray. 3. Optical disk drive bay (empty). You may install an additional optical di...

Page 15 - Rear panel

1-5 ASUS V-series M4A3000E 1.3 Rear panel The system rear panel includes the power connector and several I/O ports that allow convenient connection of devices. 1. Voltage selector. This switch allows you to adjust the system input voltage according to the voltage supply in your area. See the section...

Page 16 - LAN port LED indications

1-6 Chapter 1: System introduction 4.. Power.Switch.. This switch is for switching on/off the power supply unit. 5.. Chassis.fan.vent.. This vent is for the fan that provides ventilation inside the system chassis. 6.. PS/2.mouse.port.. This green 6-pin connector is for a PS/2 mouse. 7.. PS/2.keyboar...

Page 17 - Port; Remove these covers when installing expansion

1-7 ASUS V-series M4A3000E Refer to the audio configuration table below for the function of the audio ports in 2, 4, or 6-channel configuration. Voltage selector The PSU has a 115 V/230 V voltage selector switch located beside the power connector. Use this switch to select the appropriate system inp...

Page 18 - Internal components; Front panel cover

1-8 Chapter 1: System introduction 1.4 Internal components The illustration below is the internal view of the system when you remove the side cover and the power supply unit. The installed components are labeled for your reference. 1. Front panel cover 2. 5.25-inch optical drive bays 3. 3.5-inch dri...

Page 21 - Chapter 2; Starting

R This chapter helps you power up the system and install drivers and utilities from the support DVD. Chapter 2 Starting .up

Page 22 - Installing an operating system; The barebone system supports Windows; utility drivers that enhance the system features.; Powering up

2-2 Chapter 2: Starting up R R 2.1 Installing an operating system The barebone system supports Windows ® XP/Vista/7 operating systems (OS). Always install the latest OS version and corresponding updates so you can maximize the features of your hardware. 2.3 Support DVD information The support DVD th...

Page 23 - Running the support DVD; VIA Audio Driver

2-3 ASUS V-series M4A3000E 2.3.1 Running the support DVD To begin using the support DVD, place the DVD in your optical drive. The DVD automatically displays the Drivers menu if Autorun is enabled in your computer. If Autorun is NOT enabled in your computer, browse the contents of the support DVD to ...

Page 25 - ASUS Turbo Key

2-5 ASUS V-series M4A3000E ASUS Turbo Key Installs ASUS Turbo Key. ASUS.Express.Gate.Installer Installs the ASUS Express Gate application. Microsoft.DirectX.9.0c Installs the Microsoft ® DirectX 9.0c driver. The Microsoft DirectX ® 9.0c is a multimedia technology that enhances computer graphics and ...

Page 26 - VIA HD Audio User’s Manual

2-6 Chapter 2: Starting up 2.3.4. Manual.menu The Manual menu contains a list of supplementary user manuals. Click an item to open the folder of the user manual. Most user manual files are in Portable Document Format (PDF). Install the Adobe ® Reader from the Utilities menu before opening a user man...

Page 27 - this information on the inside front cover of this user guide.

2-7 ASUS V-series M4A3000E 2.3.5. ASUS.Contact.information Click the Contact tab to display the ASUS contact information. You can also find this information on the inside front cover of this user guide.

Page 28 - specified information.; Browse this DVD; Displays the support DVD contents in graphical format.

2-8 Chapter 2: Starting up 2.3.6. Other.information The icons on the top right corner of the screen give additional information on the motherboard and the contents of the support DVD. Click an icon to display the specified information. Motherboard.Info Displays the general specifications of the moth...

Page 29 - Filelist

2-9 ASUS V-series M4A3000E Filelist Displays the contents of the support DVD and a brief description of each in text format.

Page 30 - Software information; installation wizard appears.; Utilities; Launching AI Manager

2-10 Chapter 2: Starting up 2.4 Software information Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme file that came with the software for more information. Installing.AI.Manager To install AI Manager o...

Page 31 - Click the Maximize/restore button; Main; The Main menu contains five utilities:; Probe; the full AI Disk window and select the items you want to clear. Click; Apply

2-11 ASUS V-series M4A3000E AI.Manager.quick.bar The AI Manager quick bar saves the desktop space and allows you to launch the ASUS utilities or display system information easily. Click any of the Main, My Favorites, Support or Information tab to display the menu’s contents. Main My.Favorites Suppor...

Page 32 - When using AI Security for the first time, you are asked to set a; Ok

2-12 Chapter 2: Starting up AI Security AI Security enables you to set a password to secure your devices, such as USB flash disks and CD/DVD disks, from unauthorized access. . To.lock.a.device: 1. When using AI Security for the first time, you are asked to set a password. Enter a password with at mo...

Page 33 - Click the; Temperature; tab, then select an item to

2-13 ASUS V-series M4A3000E AI Booting AI Booting allows you to specify the boot device priority sequence. . To.specify.the.boot.sequence:. 1. Select a device, then click on the left/right button to specify the boot sequence. 2. When done, press Apply . AI Probe AI Probe automatically detects and di...

Page 34 - allows you to add applications that you frequently use, saving you; Add; , then locate the application you want to add to; Open; on the file location window. The application is added to

2-14 Chapter 2: Starting up My.Favorites My.Favorites allows you to add applications that you frequently use, saving you from searching for the applications throughout your computer. To.add.an.application: 1. Click Add , then locate the application you want to add to My.Favorites . 2. Click Open on ...

Page 35 - Support; Click any links on the; Information; Click the tab on the

2-15 ASUS V-series M4A3000E Support Click any links on the Support. window to go to the ASUS website, technical support website, download support website, or contact information. Information Click the tab on the Information. window to see the detailed information about your system, motherboard, CPU,...

Page 36 - Windows; Place the Support DVD into the optical drive. The; Drivers; menu appears if; Autorun; is enabled on your computer.; Select your preferred language, then click; OK; The InstallShield Wizard for Express Gate appears. Click; Next

2-16 Chapter 2: Starting up 2.4.2. ASUS.Express.Gate ASUS Express Gate is an instant-on environment that gives you quick access to the Internet. Eight seconds after powering on your computer, you can instantly surf the Internet, use Skype or other Express Gate applications without entering the Windo...

Page 37 - Express Gate in Drive C. Click; Follow the onscreen instructions to complete the installation.; Exit; Key

2-17 ASUS V-series M4A3000E 5. Select the target drive where you want to install Express Gate. If you have multiple partitions installed on your computer, it is recommended to install Express Gate in Drive C. Click Next to continue. 6. Follow the onscreen instructions to complete the installation. T...

Page 38 - Using the LaunchBar; Close; Chat; view PDF files from the web pages or your USB storage device.

2-18 Chapter 2: Starting up Express.Gate.Environment.hot-keys: Key Function <Alt> + <Tab> Switch between softwares <Ctrl> + <Alt> + <Del> Bring up Power-Off dialog box <Ctrl> + <Alt> + <Print Screen> Save screen snapshot as picture to file When you are...

Page 39 - Launches the help file.; Configures the network.; Yes; To configure the network settings:; Configuration Panel; configurations. Each network interface; Enable

2-19 ASUS V-series M4A3000E The smaller icons on the right side of the LaunchBar are: Displays your Express Gate version. Launches the help file. Launches the Configuration Panel which allows you to specify network settings and other settings. Configures the network. Adjusts the volume. This icon ap...

Page 40 - to configure the xDSL/cable dial-up settings. Choose whether; to configure the; to configure the static IP settings manually. If your

2-20 Chapter 2: Starting up • xDSL / Cable dial-up (PPPoE) settings: If you use a network cable connected directly to your DSL/cable modem, click Setup to configure the xDSL/cable dial-up settings. Choose whether the DSL/cable modem is connected to your computer’s LAN port. Key in the username and p...

Page 41 - allows you to view pictures saved on your hard drive or external; Express Gate introduces a; from the

2-21 ASUS V-series M4A3000E Using.the.Photo.Manager Photo.Manager allows you to view pictures saved on your hard drive or external storage devices. You can view pictures in thumbnail view, in an enlarged view individually, in a filename/data list view, or play them in a slideshow. JPEG, GIF, BMP, an...

Page 42 - Configuring Express Gate in BIOS Setup; menu to configure

2-22 Chapter 2: Starting up Configuring Express Gate in BIOS Setup To enter the motherboard BIOS Setup program, click Exit on the splash screen and then hold down <Del> during POST. Go to the Tools menu to configure Express Gate. Refer to 4.7.2.Express.Gate for details. Repairing.Express.Gate ...

Page 43 - Chapter 3; Motherboard

R This chapter gives information about he motherboard that comes with the system. This chapter includes the motherboard layout, jumper settings, and connector locations. Chapter 3 Motherboard .info

Page 44 - Introduction; The Vintage V-series M4A3000E barebone system comes with an ASUS; Motherboard layout

3-2 Chapter 3: Motherboard info 3.1 Introduction The Vintage V-series M4A3000E barebone system comes with an ASUS motherboard. This chapter provides technical information about the motherboard for future upgrades or system reconfiguration. 3.2 Motherboard layout M4A78LT-M LE PCIEX16 PCIEX1_1 PCI2 PC...

Page 45 - Jumpers; This jumper allows you to clear the Real Time Clock (RTC) RAM in; M4A78LT-M LE Clear RTC RAM

3-3 ASUS V-series M4A3000E 3.3 Jumpers 1. Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data ...

Page 46 - Set these jumpers to +5V to wake up the computer from S1 sleep mode; Keyboard power setting

3-4 Chapter 3: Motherboard info 2. USB device wake-up (3-pin USBPW1-4, USBPW5-10) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set these jumpers to +5VSB to wake up the compurer fr...

Page 47 - Connectors; M4A78LT-M LE SATA connectors

3-5 ASUS V-series M4A3000E 3.4 Connectors 1. Serial port connectors (10-1 pin COM1) The connector is for a serial (COM) port. Connect the serial port module cable to the connector, then install the module to a slot opening at the back of the system chassis. The serial port bracket (COM1) is purchase...

Page 48 - then select one of the following modes to configure your device.; M4A78LT-M LE IDE connector

3-6 Chapter 3: Motherboard info 3. IDE connector (40-1 pin PRI_IDE) The onboard IDE connector is for the Ultra DMA 133/100 signal cable. There are three connectors on each Ultra DMA 133/100 signal cable: blue, black, and gray. Connect the blue connector to the motherboard’s IDE connector, then selec...

Page 49 - M4A78LT-M LE Parallel port connector

3-7 ASUS V-series M4A3000E 5. LPT connector (26-1 pin LPT) The LPT (Line Printing Terminal) connector supports devices such as a printer. LPT standardizes as IEEE 1284, which is the parallel port interface on IBM PC-compatible computers. 4. USB connectors (10-1 pin USB56, USB78, USB910) These connec...

Page 50 - M4A78LT-M LE fan connectors; M4A78LT-M LE Digital audio connector

3-8 Chapter 3: Motherboard info 6.. CPU,.chassis.and.power.fan.connectors.. (4-pin CPU_FAN, 3-pin CHA_FAN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. DO.NOT forget to connect the fan cables to t...

Page 51 - supports either HD Audio or legacy AC’97 audio standard.; Devices Configuration; speaker allows you to hear system beeps and warnings.; Speaker out connector

3-9 ASUS V-series M4A3000E 8. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC’97 audio standard. • We recommend that you connect a high-definition front panel audio module to this connector to...

Page 52 - M4A78LT-M LE ATX power connectors

3-10 Chapter 3: Motherboard info • For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 300 W. • DO.NOT forget to connect the 4-pin ATX12V power plug; otherwise, the system ...

Page 53 - M4A78LT-M LE System panel connector

3-11 ASUS V-series M4A3000E •. System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. •. Hard disk drive acti...

Page 55 - BIOS; This chapter tells how to change; Chapter 4

R BIOS .setup This chapter tells how to change system settings through the BIOS Setup menus and describes the BIOS parameters. Chapter 4

Page 56 - Managing and updating your BIOS; Updates the BIOS using a USB flash disk.; Save the current BIOS file

4-2 Chapter 4: BIOS setup 4.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup.1. ASUS.Update : Updates the BIOS in Windows ® environment. 2. ASUS.EZ.Flash.2: Updates the BIOS using a USB flash disk. 3. ASUS...

Page 57 - desktop by clicking

ASUS V-series M4A3000E 4-3 3. Select the ASUS FTP site nearest you to avoid network traffic, or click Auto.Select . Click Next . Updating.the.BIOS.through.the.Internet To update the BIOS through the Internet:1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start. >.Program...

Page 58 - Updating the BIOS through a BIOS file; To update the BIOS through a BIOS file:; Locate the BIOS file from the Open

4-4 Chapter 4: BIOS setup Updating the BIOS through a BIOS file To update the BIOS through a BIOS file: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start. >.Programs.>.ASUS.>.ASUSUpdate.>.ASUSUpdate . The ASUS Update main window appears. 2. Select Update BIOS...

Page 59 - Tools; menu to select

ASUS V-series M4A3000E 4-5 To update the BIOS using EZ Flash 2: 1. Visit the ASUS website (www.asus.com) to download the latest BIOS file for the motherboard. 2. Save the BIOS file to a USB flash disk, then restart the system. 3. You can launch the EZ Flash 2 by two methods. 4.1.2. ASUS.EZ.Flash.2.u...

Page 60 - device that contains the updated BIOS file.; or removable device for the BIOS file.

4-6 Chapter 4: BIOS setup 4.1.3. ASUS.CrashFree.BIOS.3.utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can update a corrupted BIOS file using the motherboard support DVD or a removabl...

Page 61 - BIOS setup program; and updating your BIOS”.; Load Default Settings

ASUS V-series M4A3000E 4-7 4.2 BIOS setup program This motherboard supports a programmable Serial Peripheral Interface (SPI) chip that you can update using the provided utility described in section “4.1 Managing and updating your BIOS”. Use the BIOS Setup program when you are installing a motherboar...

Page 62 - For changing the basic system configuration; Advanced; configuration

4-8 Chapter 4: BIOS setup System Time [12:56:38] System Date [Tue 11/24/2009 Primary IDE Master :[Not Detected] Primary IDE Slave :[Not Detected] SATA 1 :[Not Detected] SATA 2 :[Not Detected] SATA 3 :[Not Detected] SATA 4 :[Not Detected] SATA 5 :[Not Detected] SATA 6 :[Not Detected] SATA Configurati...

Page 63 - the specific items for that menu. For example,; window with the configuration

ASUS V-series M4A3000E 4-9 4.2.4. Menu.items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items.The other items (Advanced, Power, Boot, Tools, and Exit) on the menu bar have their respective menu items. 4.2.5. Sub-men...

Page 64 - Main menu; you an overview of the basic system information.

4-10 Chapter 4: BIOS setup System Time [12:56:38] System Date [Tue 11/24/2009 Primary IDE Master :[Not Detected] Primary IDE Slave :[Not Detected] SATA 1 :[Not Detected] SATA 2 :[Not Detected] SATA 3 :[Not Detected] SATA 4 :[Not Detected] SATA 5 :[Not Detected] SATA 6 :[Not Detected] SATA Configurat...

Page 66 - Sets the Smart Monitoring, Analysis, and Reporting Technology.

4-12 Chapter 4: BIOS setup PIO.Mode.[Auto] Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4] DMA.Mode.[Auto] Selects the DMA mode. Configuration options: [Auto] SMART.Monitoring.[Auto] Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration options: [Auto] ...

Page 67 - Processor; Displays the auto-detected CPU specification.

ASUS V-series M4A3000E 4-13 4.3.5. System.Information This menu gives you an overview of the general system specifications. The BIOS automatically detects the items in this menu. BIOS.Information Displays the auto-detected BIOS information. Processor Displays the auto-detected CPU specification. Sys...

Page 68 - Advanced menu; automatically detects.

4-14 Chapter 4: BIOS setup 4.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. v02.61 (C)Copyright 1985-2009, A...

Page 69 - Chipset; North Bridge Configuration

ASUS V-series M4A3000E 4-15 Microcode.Updation.[Enabled] Enables or disables Microcode Updation. Configuration options: [Disabled] [Enabled] Secure Virtual Machine Mode [Disabled] Enables or disables Secure Virtual Machine Mode (SVM). Configuration options: [Disabled] [Enabled] Cool.‘n’.Quiet.[Enabl...

Page 70 - Allows you to enable the channel memory interleaving.

4-16 Chapter 4: BIOS setup Memory Configuration Memory Configuration Bank Interleaving [Auto] Channel Interleaving [XOR of Address bit] Enable Clock to All DIMMs [Disabled] MemClk Tristate C3/ATLVID [Disabled] Memory Hole Remapping [Enabled] DCT Unganged Mode [Always] Power Down Enable [Disabled] En...

Page 71 - ECC Configuration

ASUS V-series M4A3000E 4-17 ECC Configuration ECC Configuration ECC Mode [Disabled] DRAM ECC Enable [Disabled] DRAM SCRUB REDIRECT [Disabled] 4-Bit ECC Mode [Disabled] DRAM BG Scrub [Disabled] Data Cache BG Scrub [Disabled] L2 Cache BG Scrub [Disabled] L3 Cache BG Scrub [Disabled] Set the level of E...

Page 73 - configures the Plug and Play devices not required for boot.

ASUS V-series M4A3000E 4-19 HDAudio.Controller.[Enabled] Enables or disables the high definition audio controller. Configuration options: [Enabled] [Disabled] Front Panel Select [HD Audio] Configuration options: [HD Audio] [AC97] OnBoard LAN Controller [Enabled] Configuration options: [Enabled] [Dis...

Page 74 - item then press to display the configuration options.; Allows you to enable or disable the USB functions.

4-20 Chapter 4: BIOS setup The Module Version and USB Devices Enabled items show the auto-detected values. If no USB device is detected, the item shows None. 4.4.5 USB Configuration The items in this menu allows you to change the USB-related features. Select an item then press <Enter> to displ...

Page 75 - USB Mass Storage Device Configuration; Power menu; configuration options.

ASUS V-series M4A3000E 4-21 The following items may only appear when a USB storage device is plugged. USB Mass Storage Device Configuration USB.Mass.Storage.Reset.Delay.[20.Sec] Allows you to set the maximum time that the BIOS waits for the USB storage device to initialize. Configuration options: [1...

Page 76 - was before the AC power loss.

4-22 Chapter 4: BIOS setup 4.5.4 APM Configuration Restore on AC Power Loss [Power Off] When set to [Power Off], the system goes into off state after an AC power loss. When set to [Power On], the system goes on after an AC power loss. When set to [Last State], the system goes into either off or on s...

Page 77 - if you do not want the

ASUS V-series M4A3000E 4-23 4.5.5. Hardware.Monitor v02.61 (C)Copyright 1985-2009, American Megatrends, Inc. BIOS SETUP UTILITY Power CPU Temperature [55.5ºC/131.5ºF] MB Temperature [37ºC/98.5ºF] CPU Fan Speed [3229RPM] Chassis Fan Speed [N/A] VCORE Voltage [ 1.344V] 3.3V Voltage [ 3.280V] 5V Voltag...

Page 78 - Boot menu

4-24 Chapter 4: BIOS setup 4.6 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menu. 4.6.1. Boot.Device.Priority Select Screen Select Item Enter Go to Sub-screen F1 General Help F10 Save and Exit ESC Exit Boot Devi...

Page 79 - Allows you to select the power-on state for the NumLock.

ASUS V-series M4A3000E 4-25 4.6.2 Boot Settings Configuration Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Boot Settings Configuration Quick Boot [Enabled] Full Screen Logo [Enabled AddOn ROM Display Mode [Force BIOS] Bootup Num-Lock [On] Wait For ‘F1’ If Err...

Page 80 - Security; an item then press to display the configuration options.

4-26 Chapter 4: BIOS setup If you forget your BIOS password, you can clear it by erasing the CMOS Real Time Clock (RTC) RAM. See section 3.3.Jumpers for information on how to erase the RTC RAM. 4.6.3. Security The Security menu items allow you to change the system security settings. Select an item t...

Page 82 - Tools menu

4-28 Chapter 4: BIOS setup 4.7 Tools menu The Tools menu items allow you to launch special functions. Select an item then press <Enter> to display the sub-menu. 4.7.1. ASUS.EZ.Flash.2 Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message appears. Use the left/...

Page 83 - screen before starting Windows or other installed OS. Choose

ASUS V-series M4A3000E 4-29 4.7.3. AI.NET.2 AI NET 2 Pair Status Length Check Atheros LAN cable [Disabled] Check Atheros LAN cable during POST. BIOS SETUP UTILITY Tools Check Atheros LAN cable [Disabled] Allows you enable or disable checking Atheros LAN cable during POST. Configuration options: [Dis...

Page 84 - Time, and Password, the BIOS asks for a confirmation before exiting.; Load Setup Defaults; Exit menu

4-30 Chapter 4: BIOS setup Exit.&.Save.Changes Once you are finished making your selections, choose this option from the Exit menu to ensure the values you selected are saved to the CMOS RAM. An onboard backup battery sustains the CMOS RAM so it stays on even when the PC is turned off. When you ...

Asus V6-M4A3000E- User Manual

Table of Contents:

Summary

Other Asus Models