Page 2 - Table of Contents
Table of Contents 1. Introduction.............................................................................................................................. 3 2. System Requirements ........................................................................................................... 3 3. EC...
Page 3 - PC with USB Port
1. Introduction Congratulations on your purchase of Huawei EC156 TATA Photon Plus USB Data Modem Device. The User Guide contains important information on the proper use and correct operation of Huawei EC156 TATA Photon Plus USB Data Modem Device. We recommend that you read this manual carefully to e...
Page 4 - It connects the device to your PC.
3. EC156 Appearance Please find below the description that you need to know to start using your device. Name Description 1.USB Plug It connects the device to your PC. 2.Strap Hole You can tie the cap and the USB Stick together by threading a strap through the strap holes, so that the cap will not be...
Page 5 - Technical Specifications; device will operate on Tata Photon Whiz speeds of up to 153.6 Kbps
4. Technical Specifications Modem Type USB Dongle NON-RIUM Mode EVDO REV A Frequency (Band ) 800 MHz Antenna Type Internal Dimension 83.0mm×26.5mm×11.5mm Memory Card Slot Support microSD card External Memory Support Up to 4GB Speeds Up to 3.1 Mbps (Downlink) & Up to 1.8 Mbps (Uplink) NOTE: In re...
Page 6 - Inserting a microSD Card; Slide the back cover to remove it from the device.
5. Inserting a microSD Card 1. Slide the back cover to remove it from the device. 2. Insert the microSD card into the corresponding card slot, as shown in the following figure. 3. Replace the back cover and slide it into place.
Page 8 - Install the Dialer & Driver; “AutoRun.exe” file or right click and click on Auto
2 . Install the Dialer & Driver If PC opens the auto run function, it will pop up an installation interface. If not, please go to CD as shown in the figure below and open it and double click the “AutoRun.exe” file or right click and click on Auto play. Please refer to the following screenshots f...
Page 10 - Please click on “Finish” button
Page 11 - . The main interface appears; When the installation is complete, the following dialer appears
After installation, please go back to desktop, click on the icon ” Tata Photon+ ” . The main interface appears When the installation is complete, the following dialer appears 1. As soon as the installation is complete the default dialer will appear as follows
Page 12 - Continue; Activation card
2. On clicking the “ Continue ” button, the following screen appears. Please select the Prepaid/Postpaid option depending on the services that you wish to opt for. Gently scratch the silver strip on the “ Activation card ” you have received with the Starter kit, to reveal your 14-digit PIN. Enter yo...
Page 16 - Un-installation of Application Software; Exit Management procedures.; Installation Procedure for Mac OS; Connect the USB Modem with your PC via USB port.
Un-installation of Application Software 1. Exit Management procedures. 2. Remove the EC156 device from the system then pull it out. 3. Open “Add/Remove program” in the control panel. 4. Accord the prompt, finish un-installation. Installation Procedure for Mac OS 1 . Connect the USB Modem with PC Con...
Page 17 - Insert the Device into your PC.
2 . Install the Dialer & Driver Insert the Device into your PC. Double click icon of “ Tata Photon+ ” , Click “ Continue ” to start the installation.
Page 18 - Software License Agreement; then click
Read the Software License Agreement then click “ Continue ”. Click “Agree” to accept the license agreement.
Page 21 - Click on the “Connect” button and start surfing.
2. Click on the “Connect” button and start surfing.
Page 24 - Once after inserting the modem double click and open the folder.
Install the Dialer & Driver Once after inserting the modem double click and open the folder. Open new terminal go to the path cd /media/Tata\ Photn+ \ \ \ \ / .
Page 25 - to install Tata Photon+ dialer and press enter.
Type the command sh ./install to install Tata Photon+ dialer and press enter.
Page 27 - again press enter key.
again press enter key. When the installation is complete, the following dialer appears
Page 30 - UninstallMobilePartner; and press enter key will
2. Type ./ UninstallMobilePartner and press enter key will uninstall TataPhotn+.
Page 36 - Maybe the computer does not open the
8. Troubleshooting If your radio card has abnormal conditions, please refer to the following table. Common problems Check item Cannot automatically install the driver & Dialer tool in the first time Maybe the computer does not open the auto run function. Please go to “My Computer” - >CD Rom w...
Page 37 - Device is not detecting in MAC OS
Common problems Check item Device is not detecting in MAC OS Please check the drivers (HuaweiDataCardDriver.kext) are present in the following path /System/Library/Extensions . If not present please reinstall the application. Device is detecting in MAC OS, But not showing signal strength Please chec...
Page 39 - Care and Maintenance; Do not use or store the radio card in dusty, dirty areas.; Warnings and Precautions
9. Care and Maintenance Your radio card is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fulfill any warranty obligations and to enjoy this product for many years. Keep the radio card and all its parts and accessories out of sm...
Page 41 - Traffic Security
locations include areas below the deck on boats, chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust, or metal powders. Ask the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) whether this device can...
Page 42 - Keep the wireless device away from a fire or a lit cigarette.
Operating Environment Do not use the device in dusty, damp, and dirty places or places with magnetic fields. Otherwise, it may result in malfunction of the circuit. On a stormy day with thunder, do not use your device when it is being charged, to prevent any danger caused by lightning. While u...
Page 44 - This device may not cause harmful interference.
Body Worn Operation Important safety information regarding radiofrequency (RF) radiation exposure is as follows: To ensure compliance with RF exposure guidelines, the device must be used with a minimum of 2.5cm distance from the body. Failure to observe these instructions could result in your RF...