Asus Motherboard P5LD2- User Manual
Asus Motherboard P5LD2– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Part B: Configure Intel RAID controller
- Page 3 – motherboard LSI RAID controller; Part A: Configure motherboard BIOS
- Page 8 – motherboard Adaptec RAID controller
- Page 9 – Part A: Adaptec SATA Controller Setting
- Page 10 – Part C: Create array on the Adaptec SATA RAID Controller
- Page 13 – Promise SX8300 RAID PCI-X controller card
DocSTAR National Service
Page 1 of 15
For further assistance, please contact DocSTAR Technical Support at 1-800-367-5906.
Date:
April
25,
2006
Bulletin Number:
6081
Subject:
How-to Configure RAID on new docSTAR systems
Supersedes:
None
The following Service Bulletin should be copied and distributed to all technicians and inserted
into your service bulletin binder.
For a printable version of this document,
click here
Importance:
Normal
This Information Applies to:
All new DocSTAR systems
Summary:
This service bulletin outlines how-to configure RAID on docSTAR’s new Series 3 turnkey
systems
Details:
Quick Links to docSTAR Models:
•
docSTAR EP, SP, Workgroup, and Departmental w/internal RAID1
•
docSTAR SPX and Enterprise w/internal RAID1 – LSI Controller
•
docSTAR SPX and Enterprise w/internal RAID1 – Adaptec Controller
•
docSTAR SPX and Enterprise w/internal RAID5
Asus P5LD2 motherboard RAID controller
The following steps outline how to create/define a RAID1 array using the onboard Intel RAID
controller that’s integrated into the Asus P5LD2 motherboard. The Asus P5LD2 motherboard
will typically be found in docSTAR EP, SP, Workgroup, and Departmental systems.
Part A: Configure motherboard BIOS
The following configuration changes need to be made in the motherboard BIOS prior to entering
Intel Matrix Storage Manager Utility:
1. Press the “Delete” key during POST to enter the BIOS setup.
2. Go to the Main Menu, select IDE Configuration, then press “Enter”.
3. Select the item Configure SATA As, then press “Enter” to display the configuration options.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
DocSTAR National Service Page 2 of 15 For further assistance, please contact DocSTAR Technical Support at 1-800-367-5906. 4. Select “RAID” from the options, then press “Enter”. 5. Select the item Onboard Serial-ATA BOOTROM, press “Enter”, then select “Enable” from the options. 6. Save you changes an...
DocSTAR National Service Page 3 of 15 For further assistance, please contact DocSTAR Technical Support at 1-800-367-5906. 4. Select “RAID1 (Mirror)” for the RAID Level, then press “Enter” twice so that “Create Volume” is highlighted. 5. Press “Enter” when the “Create Volume” item is highlighted. The...
DocSTAR National Service Page 8 of 15 For further assistance, please contact DocSTAR Technical Support at 1-800-367-5906. 4. A progress bar will appear on the screen. 5. Press the “Esc” key after Initialization has completed. 6. Press the “Esc” key twice and then select “Yes” to exit the utility. Th...
