Asus E7702- User Manual
Asus E7702– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Page 3
- Page 9 – Page 9; How to run demo; Figure 8 Insert jumper to enable SFP+
- Page 16 – Revision History; Revision
dg_toe10gip_instruction_xilinx_en.doc
10-Nov-14
Page 1
TOE10G-IP Demo Instruction
Rev1.1
10-Nov-14
This document describes the instruction to run TOE10G-IP for transferring 10-Gb data between
FPGA development board and PC through 10Gigabit Ethernet. This demo can select to run with
supported and unsupported Jumbo frame PC.
1 Environment Setup
As shown in Figure 1 -Figure 3, to run TOE10G-IP standard demo, please prepare
1) FPGA Development board (KC705/VC707/ZC706)
2) PC with 10Gigabit Ethernet support or 10Gigabit Ethernet card
3) 10 Gigabit SFP+ Copper Cable (DAC) or 2x10-Gigabit SFP+ Transceiver with Optical
cable for network connection between FPGA Development board and PC
4) micro USB cable for programming FPGA between FPGA Development board and PC
5) “send_tcp_client_10G.exe” and “recv_tcp_client_10G.exe”, provided by Design Gateway,
which are test application available on PC
Figure 1 TOE10G-IP Demo Environment Setup on KC705
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
dg_toe10gip_instruction_xilinx_en.doc 10-Nov-14 Page 3 2 Demo description There are two test modes, i.e. sending mode and receiving mode between FPGA development board, running as TCP Server, and PC which running as TCP Client. Each transfer mode requires different test application on PC and differe...
dg_toe10gip_instruction_xilinx_en.doc 10-Nov-14 Page 9 4 How to run demo Both Sending and Receiving demo requires same steps to set up hardware as follows. - Insert jumper to enable SFP+ (J4 for KC705, J17 for ZC706, or J6 for VC707), as shown in Figure 8. Figure 8 Insert jumper to enable SFP+ - For...
dg_toe10gip_instruction_xilinx_en.doc 10-Nov-14 Page 16 5 Revision History Revision Date Description 1.0 05-Sep-14 Initial version release 1.1 10-Nov-14 Add ZC706 support
