Asus CUV4X-VM- User Manual

Page 2 - st Edition Printed in Taiwan October 2001

PCM-3900 PC/104 IDE RAID Module 3 Copyright notice This document is copyrighted, 2000, by Advantech Co., Ltd. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be ...

Page 3 - Chapter 1; and; PC/104 IDE RAID Module; Hard Disk Compatibility:; Requirements

PCM-3900 PC/104 IDE RAID Module 4 Chapter 1 Introduction. PC/104 IDE RAID Module is an IDE to IDE Disk Array Controller. A “Real-Time-Backup” device designed for Enterprises, Schools, and Personal Using. It provides a solution for low cost, high performance and redundant Disk Array function. 1.1 Fun...

Page 5 - Installation

PCM-3900 PC/104 IDE RAID Module 6 Operating Temperature ! 0 ℃ ~ 70 ℃ Cable ! Host IDE × 1, Driver IDE × 2 Supports Operation Systems ! Windows NT Server and Workstation, DOS6.22, Windows 98/95/3.1x ! NetWare 3.12/4.11/5.0, ! SCO UNIX System V ! OS/2 ! Linux (RedHat, Slack Ware, Debian, SuSe, OpenLin...

Page 6 - Description

PCM-3900 PC/104 IDE RAID Module 7 2.2 Device Description PC/104 IDE RAID Module Layout and Parts: Figure 2.1 PC/104 IDE RAID Module 1. Host IDE Use an IDE ribbon cable to connect host onboard IDE slot 2. HDD1 IDE Use one IDE ribbon cable to connect the hard disk drive HDD1 3. HDD2 IDE Use one IDE ri...

Page 7 - Power In; Connect to power supply; HDD1 IDE Switch

PCM-3900 PC/104 IDE RAID Module 8 17. Power In Connect to power supply Item Figure Description 1 HDD1 IDE Switch ON = HDD1 Insert OFF =HDD1 Move 2 HDD2 IDE Switch ON = HDD2 Insert OFF =HDD2 Move 3 Buzzer Switch ON = Power On OFF =Power Off Table2.2 PC/104 IDE RAID Module Jumper Setting description

Page 8 - After the installation of; Jumper; Jupmer; setting

PCM-3900 PC/104 IDE RAID Module 9 Chapter 3 How to Use After the installation of PC/104 IDE RAID Module is completed, users may select the function conveniently just by altering Jumper setting. 3.1 Jumper Setting Figure3.1 PC/104 IDE RAID Module Jupmer setting

Page 9 - Jumper Setting Description:; Item Figure; Upgrade Firmware

PCM-3900 PC/104 IDE RAID Module 10 ✦ ✦ ✦ ✦ Jumper Setting Description: Item Figure Description 1 8 7 6 5 4 3 2 1 Master / Slave ON = Master OFF =Slave 2 8 7 6 5 4 3 2 1 Mirror / JBOD ON = JBOD OFF =Mirror 3 8 7 6 5 4 3 2 1 Upgrade Firmware ON = Upgrade Mode OFF =Normal Mode Table3.1 PC/104 IDE RAID ...

Page 10 - Upgrade

PCM-3900 PC/104 IDE RAID Module 11 Chapter 4 Auto-Rebuild You may install software into one hard disk drive first, and then use “Auto-Rebuild Function” described in this chapter, to copy the content of the first hard disk drive into another one. Reference Section 3.1 “ Jumper Setting” to select “ Mi...

Page 11 - Figure 5.1 Firmware Upgrade Jumper setting; Please upgrade your F/W as steps as following,; Firmware Upgrade Disk; Where To Get New Firmware & Upgrade Utility

PCM-3900 PC/104 IDE RAID Module 12 Figure 5.1 Firmware Upgrade Jumper setting # Please upgrade your F/W as steps as following, Step 1. Insert your Firmware Upgrade Disk and boot your system from Floppy Drive. Step 2. Execute the DOS command as following, A: \> (1) (2) (3) (For example: FLASH103.E...

Page 12 - Chapter 6; Compatibility List of Chipsets; Quantum

PCM-3900 PC/104 IDE RAID Module 13 Chapter 6 Hardware Compatibility List (HCL) PC/104 IDE RAID Module can be compatible with most of IBM PCs’ chipsets, and hard disk drives. All of the lists on below are part of our data which are just for reference only. For more updated information, please check o...

Table of Contents:

Summary

Other Asus Models