Asko DFI643.AU - User Manual

3. Top up with rinse aid By using rinse aid you will improve your drying result. You will alsoachieve a better dishwashing result with glassware and dishes. Press to open 1 Open the rinse aid compartment lid. 2 Carefully top up with rinse aid. Only add rinse aid to the level marked max . 3 Wipe up a...

Fragile dishes Some cookware is not dishwasher safe. This can be for several reasons.Some materials cannot withstand strong heat, others can be damagedby dishwashing detergent. Exercise caution with, for example, handmade items, fragile decoration,crystal/glassware, silver, copper, tin, aluminium, w...

Washing large plates Move the foldable tines and their mounts to widen the distance betweenthe tine rows to adapt the lower basket to plates with a diameter greaterthan 25 cm. Cutlery basket Place cutlery with the handles facing down, except for knives, andspread them out as much as possible. Ensure...

Using the dishwasher Add detergent Press to open 1 Prewash detergent compartment 2 Main wash detergent compartment Detergent is added according to water hardness. Follow the instructions on the detergent packaging. Too much detergent can result in less effective dishwashing and alsoentails greater e...

Eco Speed mode 2:00 S TA RT S T O P Select a program mode Select any options Press and hold the main power switch until the display lights up. Select the program Starting the dishwasher The main power switch Press and hold the main power switch until the display turns on. Alsocheck that the water ta...

Settings Open the dishwasher's Settings menu To open the dishwasher's Settings menu, press the Navigation button or until Settings menu is shown on the display and confirm your selection using the mode selector . To exit the dishwasher's Settings menu, select Exit and confirm your selection using th...

Care and cleaning Coarse filter The coarse filter traps larger food particles, which cannot get past thedrainage pump. Empty the coarse filter as necessary. Coarse filter 1 Lift the coarse filter by the handle. 2 Empty the coarse filter. Remember to replace it! Fine filter Debris that collects on th...

If the dishwasher still does not start and a whirring sound is heard,the overflow protection has been activated. • Shut off the water.• Remove the plug from the wall socket.• Call the service department. Drainage pump stop NOTE! Do not forget to replace the drainage pump stop. Unblocking the inlet h...

Troubleshooting Action Type of fault on the display Clear the drainage pump. See the chapter Care and cleaning. If the problem persists, call the service department. Overfilling water 1 F10 See “Water remains in the dishwasher” in the table “Problem” below. If the problem persists, call the service ...

Technical information Information on energy labelling Energy labelling AS/NZS 2007 Australian standard: 14 Number of place settings: ECO wash 1) , no options Dishwashing programs: 2:35 hours:minutes Program time: Cold water 20 °C Connection: IEC 60704-2-3 Test method for noise measurement: 1) This d...

Installation 819*- 872 559 680-760** 52 193 442 573 596 131-186 50 30-94 1198 700 [mm] *Remove locking nuts for an installed height of 820-821 mm. **Door length. Nominal dimensions. Actual measurements may vary. It is important that you read through and follow the instructions anddirections below. C...

Connection to water supply Use only the inlet hose supplied with the dishwasher. Do not re-useold or other spare hoses. The supply pipe must be fitted with a water tap (stopcock). The watertap must be easily accessible, so that the water can be shut off if thedishwasher has to be moved. Once the ins...

Quick guide Load the baskets 1. (See page 5.) Do not rinse dishes under running water before loading them in the dishwasher. Simply scrape offlarge food particles before loading the dishwasher. Check that the spray arms can rotate freely 2. Check also that the water tap is on. Don't forget! Empty th...