Page 4 - TABLE OF CONTENTS
USER GUIDE LCD PANEL 3 TABLE OF CONTENTS INTRODUCTION ..................................................................................... 5MAIN FEATURES .................................................................................... 5SUPPLIED MATERIAL.............................................
Page 7 - SUPPLIED MATERIAL; A complete set includes the following components :
USER GUIDE LCD PANEL 6 4 SUPPLIED MATERIAL A complete set includes the following components : 1. LCD Data Panel 6. Power Cable 2. VGA Cable 7. Remote Control 3. Cable-Adapt. MAC mon 8. Batteries 4. Cable-Adapt. MAC comp. 9. Box 5. Power -5, 12, 5 V 10. User Guide
Page 8 - SETTING UP THE LCD PANEL; The following are guidelines for first time set-up:
USER GUIDE LCD PANEL 7 5 SETTING UP THE LCD PANEL Switch off all equipment before connecting the components. Be aware ofstatic electricity that may build up, especially in the dry season and whenoperating on synthetic carpets. Discharge any static electricity by touchinga metallic surface before you...
Page 9 - COMPUTER; TO SET UP FROM THE REMOTE CONTROL:; STEP
USER GUIDE LCD PANEL 8 5.1 COMPUTER Connect the LCD panel, computer, monitor and power supply as shown inthe rear foldout. Connect cable (1) between the LCD panel and the computer. Use the Y-split on the computer end to connect the monitor. If you have a Macintosh computer, insert applicable adapter...
Page 10 - USING THE LCD PANEL; REMOTE CONTROL; The figure shows the different keys of the remote control.
USER GUIDE LCD PANEL 9 6 USING THE LCD PANEL The LCD panel has a set of connectors that you need to know in order tooperate the device correctly. 6.1 REMOTE CONTROL The infrared remote control (RC) is the main user interface to the device.The RC is used to set the LCD panel correctly (to get the bes...
Page 12 - CONNECTORS; CONNECTOR; LOCKING THE PANEL
USER GUIDE LCD PANEL 11 6.2 CONNECTORS All connectors are positioned on the right hand side of the LCD panel. Seethe technical data section for pinouts of the various connectors. Do not connect any other devices with similar plugs to the connectors ofthe LCD panel, as this voids any warranty and may...
Page 13 - FEATURES; DUAL SAFECOOL SYSTEM; Technical Data; VGA TEXT
USER GUIDE LCD PANEL 12 7 FEATURES The LCD panel has a variety of different features implemented. Thischapter explains each feature in detail. DUAL SAFECOOL SYSTEM The cooling operation is controlled by the overhead projector light (OHP).This safety feature ensures that the fans are always operating...
Page 15 - POSITION; ON/OFF may also be used to blank the screen.
USER GUIDE LCD PANEL 14 POSITION Due to minor variations in graphic cards, the horizontal and verticalposition may need adjustment. Select POSITION, then press LEFT anduse the cursor keys. VGA text mode (720 x 400) is correctly displayed when the image ispositioned appropriately. RESET This feature ...
Page 16 - PRACTICAL HINTS AND TIPS; Always press the RESET key first. This ensures that t
USER GUIDE LCD PANEL 15 8 PRACTICAL HINTS AND TIPS This is a list of what to do when things go wrong. Check the symptomscarefully if you experience any problem. The cure may be at your hands! Always press the RESET key first. This ensures that t he panel is in a defined state. The LCD image is compl...
Page 17 - The remote control is not working; in the front of the LCD panel
USER GUIDE LCD PANEL 16 The remote control is not working - Check if the batteries need replacement- Be sure to point at the projection screen or directly at the IR eye in the front of the LCD panel - You may be too far away from the panel (max. distance 7m/ 23 feet)
Page 18 - MAINTENANCE; If a problem cannot be solved by the dealer, please see the
USER GUIDE LCD PANEL 17 9 MAINTENANCE From time to time, the housing and protection glasses may be cleanedwith a damped, non abrasive cloth, possibly using a mild detergent toremove spots. The upper protection glass is not removable, as it only needs cleaningfrom the outside (the inside is sealed to...
Page 19 - 1 TECHNICAL DATA; GENERAL ENVIRONMENTAL LIMITS
USER GUIDE LCD PANEL 18 11 TECHNICAL DATA The technical data may change without prior notice in order to improve theproduct performance. The apparatus is designed for indoor use and should not beoperated outside the general environmental limits, as this maylead to permanent damage and violation of a...
Page 20 - DISPLAY UNIT
USER GUIDE LCD PANEL 19 DISPLAY UNIT Full color (RGB) unit connecting directly to external video sources. SIZE 310 x 310 x 40 mm12.2 x 12.2 x 1.6 inch WEIGHT 1600 grams / 3.6 lbs POWER -5, -12, 5 V LCD CELL Active matrix TFT stripe configuration COLORRESOLUTION 2.1 million (colors RESPONSE TIME 30 m...
Page 21 - MODE
USER GUIDE LCD PANEL 20 POWER SUPPLY Primary switched universal type AC to DC converter. INPUT VOLTAGE 100 to 250 VAC OUTPUT VOLTAGES +5VDC, +12VDC, -5VDC CONNECTOR 5 pin DIN male APPROVALS TÜV, UL, CSA, N, S, D, FI REMOTE CONTROL Infrared wireless remote control. BATTERIES 2 pcs LR03/AAA 1.5V penli...
Page 22 - 2 CONNECTORS; The pinouts of all external connectors are described.; POWER; This connector feeds regulated DC power to the panel.
USER GUIDE LCD PANEL 21 12 CONNECTORS The pinouts of all external connectors are described. POWER This connector feeds regulated DC power to the panel. 1 4 2 5 3 5 PIN DINFEMALE(FRONT VIEW) 12345 GNDGND+5VDC-5VDC+12VDC COMPUTER This connector relays all sync and data signals from the computer to the...
Page 23 - 3 FCC STATEMENT; INSTRUCTIONS TO USER; Reorient the receiving antenna.
USER GUIDE LCD PANEL 22 13 FCC STATEMENT This equipment has been certified to comply with the limits for a Class Acomputing device, pursuant to Subpart J of Part 15 of FCC rules. Onlyperipherals (computer input/output devices, terminals, printers, etc.)certified to comply with the Class A limits may...
Page 24 - 4 ENVIRONMENTAL STATEMENT; ITEM
USER GUIDE LCD PANEL 23 14 ENVIRONMENTAL STATEMENT This product is manufactured to minimize the stress and pollution of thesurroundings. Where possible, recyclable materials are used. ITEM RECYCLING / HANDLING PACKAGING Only recyclable materials are used MECHANICS Only recyclable plastics and metal ...
Page 25 - SERVICE INFORMATION; RMA
USER GUIDE LCD PANEL 24 15 SERVICE INFORMATION In cases where a problem cannot be solved by the assistance of yourdealer, please call the following number to get an RMA (Return Authorization Number) : +47 69 34 01 55 (Norway) To return the defective unit, package well (preferably using the originalp...
Page 26 - 6 CONNECTION LAYOUT; The foldout shows how to connect the LCD panel to the computer.
USER GUIDE LCD PANEL 25 16 CONNECTION LAYOUT The foldout shows how to connect the LCD panel to the computer.
