Page 4 - TABLE OF CONTENTS
USER GUIDE LCD PANEL 3 TABLE OF CONTENTS 1 INTRODUCTION .................................................................................. 52 MAIN FEATURES ................................................................................. 53 SUPPLIED MATERIAL ............................................
Page 7 - SUPPLIED MATERIAL; A complete set includes the following components :
USER GUIDE LCD PANEL 6 3 SUPPLIED MATERIAL A complete set includes the following components : 1. LCD Panel 6. Power -5, 12, 5 V 2. Video Cable 7. Power Cable 3. VGA Cable 8. Remote Control 4. Cable-Adapt. MAC mon 9. Batteries 5. Cable-Adapt. MAC comp. 10. Box11. User Guide
Page 8 - SETTING UP THE LCD PANEL; The following are guidelines for first time set-up:
USER GUIDE LCD PANEL 7 4 SETTING UP THE LCD PANEL Switch off all equipment before connecting the components. Be aware ofstatic electricity that may build up, especially in the dry season and whenoperating on synthetic carpets. Discharge any static electricity by touchinga metallic surface before you...
Page 9 - COMPUTER; TO SET UP FROM THE REMOTE CONTROL:; STEP
USER GUIDE LCD PANEL 8 4.1 COMPUTER Connect the LCD panel, computer, monitor and power supply as shown inthe rear foldout. Connect cable (2) between the LCD panel and the computer. Use the Y-split on the computer end to connect the monitor. If you have a Macintosh computer, insert applicable adapter...
Page 10 - VIDEO; TO SET UP FROM THE REMOTE CONTROL :
USER GUIDE LCD PANEL 9 4.2 VIDEO Connect the LCD panel to a video source as shown in the rear foldout. Use a TV set as a local video monitor if desired (the data monitor may notbe used as a video monitor). Connect the video cable (1) to the VIDEO connector on the LCD panel.Then connect the video cab...
Page 11 - USING THE LCD PANEL; REMOTE CONTROL; The figure shows the different keys of the remote control.
USER GUIDE LCD PANEL 10 5 USING THE LCD PANEL The LCD panel has a set of connectors that you need to know in order tooperate the device correctly. 5.1 REMOTE CONTROL The infrared remote control (RC) is the main user interface to the device.The RC is used to set the LCD panel correctly (to get the be...
Page 12 - Features
USER GUIDE LCD PANEL 11 The 'MEM' column in the tables below indicates whether the setting ismemorized for each source. For a detailed overview, see the Features section. REMOTE CONTROL KEYS: CONTROL FUNCTION MEM CONTR Contrast (ratio between light and dark colors) YES BRIGHT Brightness (whiteness) ...
Page 13 - CONNECTORS; CONNECTOR; LOCKING THE PANEL
USER GUIDE LCD PANEL 12 5.2 CONNECTORS All connectors are positioned on the right hand side of the LCD panel. Seethe technical data section for pinouts of the various connectors. Do not connect any other devices with similar plugs to the connectors ofthe LCD panel, as this voids any warranty and may...
Page 14 - FEATURES; DUAL SAFECOOL SYSTEM; Technical Data; VGA TEXT
USER GUIDE LCD PANEL 13 6 FEATURES The LCD panel has a variety of different features implemented. Thischapter explains each feature in detail. DUAL SAFECOOL SYSTEM The cooling operation is controlled by the overhead projector light (OHP).This safety feature ensures that the fans are always operating...
Page 17 - PRACTICAL HINTS AND TIPS; Always press the RESET key first. This ensures that t
USER GUIDE LCD PANEL 16 7 PRACTICAL HINTS AND TIPS This is a list of what to do when things go wrong. Check the symptomscarefully if you experience any problem. The cure may be at your hands! Always press the RESET key first. This ensures that t he panel is in a defined state. The LCD image is compl...
Page 18 - The remote control is not working; in the front of the LCD panel; Video is black and white only
USER GUIDE LCD PANEL 17 The remote control is not working - Check if the batteries need replacement- Be sure to point at the projection screen or directly at the IR eye in the front of the LCD panel - You may be too far away from the p anel (max. distance 7m/ 23 feet) Video is black and white only -...
Page 19 - MAINTENANCE; If a problem cannot be solved by the dealer, please see the
USER GUIDE LCD PANEL 18 8 MAINTENANCE From time to time, the housing and protection glasses may be cleanedwith a damped, non abrasive cloth, possibly using a mild detergent toremove spots. The upper protection glass is not removable, as it only needs cleaningfrom the outside (the inside is sealed to...
Page 20 - 0 TECHNICAL DATA; GENERAL ENVIRONMENTAL LIMITS
USER GUIDE LCD PANEL 19 10 TECHNICAL DATA The technical data may change without prior notice in order to improve theproduct performance. The apparatus is designed for indoor use and should not beoperated outside the general environmental limits, as this maylead to permanent damage and violation of a...
Page 21 - DISPLAY UNIT
USER GUIDE LCD PANEL 20 DISPLAY UNIT Full color (RGB) unit connecting directly to external video sources. SIZE 310 x 310 x 40 mm12.2 x 12.2 x 1.6 inch WEIGHT 1700 grams / 3.8 lbs POWER -5, -12, 5 V LCD CELL Active matrix TFT stripe configuration COLORRESOLUTION 16.7 million colors RESPONSE TIME 30 m...
Page 22 - MODE
USER GUIDE LCD PANEL 21 POWER SUPPLY Primary switched universal type AC to DC converter. INPUT VOLTAGE 100 to 250 VAC OUTPUT VOLTAGES +5VDC, +12VDC, -5VDC CONNECTOR 5 pin DIN male APPROVALS TÜV, UL, CSA, N, S, D, FI REMOTE CONTROL Infrared wireless remote control. BATTERIES 2 pcs LR03/AAA 1.5V penli...
Page 23 - 1 CONNECTORS; The pinouts of all external connectors are described.; POWER; This connector feeds regulated DC power to the panel.
USER GUIDE LCD PANEL 22 11 CONNECTORS The pinouts of all external connectors are described. POWER This connector feeds regulated DC power to the panel. 1 4 2 5 3 5 PIN DINFEMALE(FRONT VIEW) 12345 GNDGND+5VDC-5VDC+12VDC COMPUTER This connector relays all sync and data signals from the computer to the...
Page 24 - This connector is used as composite video input.
USER GUIDE LCD PANEL 23 S-VIDEO This connector is used as S-VHS video input. 4 PIN MINIDINFEMALE(FRONT VIEW) 1234 1 2 3 4 GNDGNDLUMACHROMA VIDEO This connector is used as composite video input. PHONO / RCAFEMALE(FRONT VIEW) STEMSHIELD GND COMPOSITE
Page 25 - 2 FCC STATEMENT; INSTRUCTIONS TO USER; Reorient the receiving antenna.
USER GUIDE LCD PANEL 24 12 FCC STATEMENT This equipment has been certified to comply with the limits for a Class Acomputing device, pursuant to Subpart J of Part 15 of FCC rules. Onlyperipherals (computer input/output devices, terminals, printers, etc.)certified to comply with the Class A limits may...
Page 26 - 3 ENVIRONMENTAL STATEMENT; ITEM
USER GUIDE LCD PANEL 25 13 ENVIRONMENTAL STATEMENT This product is manufactured to minimize the stress and pollution of thesurroundings. Where possible, recyclable materials are used. ITEM RECYCLING / HANDLING PACKAGING Only recyclable materials are used MECHANICS Only recyclable plastics and metal ...
Page 27 - SERVICE INFORMATION; RMA
USER GUIDE LCD PANEL 26 14 SERVICE INFORMATION In cases where a problem cannot be solved by the assistance of yourdealer, please call the following number to get an RMA (Return Authorization Number) : +47 69 34 01 55 (Norway) To return the defective unit, package well (preferably using the originalp...
Page 28 - 5 CONNECTION LAYOUT
USER GUIDE LCD PANEL 27 15 CONNECTION LAYOUT The foldout shows how to connect the LCD panel to the different video andcomputer sources.
