Page 2 - USER GUIDE
Page 4 - TABLE OF CONTENTS
USER GUIDE LCD PANEL 3 TABLE OF CONTENTS INTRODUCTION ..................................................................................... 5MAIN FEATURES .................................................................................... 5SUPPLIED MATERIAL ............................................
Page 7 - SUPPLIED MATERIAL; A complete set includes the following components :; OPTIONAL MATERIAL
USER GUIDE LCD PANEL 6 3 SUPPLIED MATERIAL A complete set includes the following components : 1. LCD Panel 8. Power -5, 12, 5 V 2. VGA-Cable 9. Power Cable 3. Cable-Adapt. MACII mon 10. BatMouse Remote Control 4. Cable-Adapt. MACII comp. 11. Batteries 5. Mouse Cable 12. Attachè Case 6. Mouse Adapter...
Page 8 - SETTING UP THE LCD PANEL; The following are guidelines for first time set-up:
USER GUIDE LCD PANEL 7 5 SETTING UP THE LCD PANEL Switch off all equipment before connecting the components. Be aware ofstatic electricity that may build up, especially in the dry season and whenoperating on synthetic carpets. Discharge any static electricity by touchinga metallic surface before you...
Page 9 - APPLICABLE ADAPTERS :; COMPUTER; TO SET UP FROM THE BATMOUSE REMOTE CONTROL :; STEP
USER GUIDE LCD PANEL 8 5.1 COMPUTER Connect the LCD panel, computer, monitor and power supply as shown inthe rear foldout. Connect the VGA cable (1) between the LCD panel and the computer. Usethe Y-split on the computer end to connect the monitor. If you have a Macintosh, EGA, CGA or NEC computer, i...
Page 10 - MOUSE
USER GUIDE LCD PANEL 9 5.2 MOUSE See the rear foldout when setting up. Connect the mouse to the LCD panel using the appropriate adapter (6) asdescribed in the table below. Then connect the adapter (6) to the mousecable at the computer end. Finally, connect the mouse cable to the LCDpanel (2). For th...
Page 12 - USING THE LCD PANEL; REMOTE CONTROL; The figure shows the different keys of the BatMouse.
USER GUIDE LCD PANEL 11 6 USING THE LCD PANEL The LCD panel has a set of connectors and controls that you need to knowin order to operate the device correctly. 6.1 REMOTE CONTROL The infrared BatMouse remote control (RC) is the main user interface tothe device. The RC is used to set the LCD panel co...
Page 14 - FRONT PANEL; CONTROL; CONNECTORS; CONNECTOR
USER GUIDE LCD PANEL 13 6.2 FRONT PANEL The front panel keyboard consists of a subset of the remote control keys. ON/OFF TUNE BRIGHT RESET CONTROL FUNCTION TUNE Adjusts the stability of the image BRIGHT Adjusts the brightness (whiteness) of the image RESET Defaults to factory settings ON/OFF LED act...
Page 15 - FEATURES; INTELLIGENT SAFECOOL SYSTEM; Technical Data; COLOR MAPPING
USER GUIDE LCD PANEL 14 7 FEATURES The LCD panel has a variety of different features implemented. Thischapter explains each feature in detail. 7.1.1 INTELLIGENT SAFECOOL SYSTEM The fan operation is controlled by the overhead projector light (OHP). Thissafety feature ensures that the fan is always op...
Page 16 - SVGA; Brightness; BRIGHTNESS; Contrast
USER GUIDE LCD PANEL 15 7.1.4 SVGA SVGA in 800 x 600 mode is compressed both horizontally and vertically to640 x 480 resolution. This feature is convenient when displaying irregularimages (like pictures, scanned images and coarse graphics). Regular images (patterns, text and fine line graphics) may ...
Page 19 - PRACTICAL HINTS AND TIPS
USER GUIDE LCD PANEL 18 8 PRACTICAL HINTS AND TIPS This is a list of what to do when things go wrong. Check the symptomscarefully if you experience any problem. The cure may be at your hands! Always press the RESET key and observe that the LED on theLCD panel is flashing. This indicates that the LCD...
Page 20 - The remote control is not working; in the front of the LCD panel; The mouse is not working; switched on
USER GUIDE LCD PANEL 19 The remote control is not working - Check if the batteries need replacement- Be sure to point at the projection screen or directly at the IR eye in the front of the LCD panel - You may be too far away from the panel (max. distance 7 m/ 23 feet) The mouse is not working - Make...
Page 21 - MAINTENANCE; If the problem cannot be solved by the dealer, please see the
USER GUIDE LCD PANEL 20 9 MAINTENANCE From time to time, the housing and protection glasses may be cleanedwith a damped, non abrasive cloth, possibly using a mild detergent toremove spots. The upper protection glass is not removable, as it only needs cleaningfrom the outside (the inside is sealed to...
Page 22 - 1 TECHNICAL DATA
USER GUIDE LCD PANEL 21 11 TECHNICAL DATA The technical data may change without prior notice in order to improve theproduct performance. The apparatus is designed for indoor use and should not beoperated outside the general environmental limits, as this maylead to permanent damage and violation of a...
Page 25 - 2 CONNECTORS; The pinouts of all external connectors are described.
USER GUIDE LCD PANEL 24 12 CONNECTORS The pinouts of all external connectors are described. 12.1.1 POWER This connector feeds regulated DC power to the panel. 1 4 2 5 3 5 PIN DINFEMALE(FRONT VIEW) 12345 GNDGND+5VDC-5VDC+12VDC 12.1.2 MOUSE This connector is used for mouse control. 8 PIN MINIDINFEMALE...
Page 26 - 3 FCC STATEMENT; Reorient the receiving antenna.
USER GUIDE LCD PANEL 25 13 FCC STATEMENT This equipment has been certified to comply with the limits for a Class Acomputing device, pursuant to Subpart J of Part 15 of FCC rules. Onlyperipherals (computer input/output devices, terminals, printers, etc.)certified to comply with the Class A limits may...
Page 27 - 4 ENVIRONMENTAL STATEMENT; ITEM
USER GUIDE LCD PANEL 26 14 ENVIRONMENTAL STATEMENT This product is manufactured to minimize the stress and pollution of thesurroundings. Where possible, recyclable materials are used. ITEM RECYCLING / HANDLING PACKAGING Only recyclable materials are used MECHANICS Only recyclable plastics and metal ...
Page 28 - 5 SERVICE INFORMATION; RMA
USER GUIDE LCD PANEL 27 15 SERVICE INFORMATION In cases where a problem cannot be solved by the assistance of yourdealer, please call the following number to get an RMA (Return Authorization Number) : +47 69 34 01 55 (Norway) To return the defective unit, package well (preferably using the originalp...
Page 29 - 6 CONNECTION LAYOUT
USER GUIDE LCD PANEL 28 16 CONNECTION LAYOUT The foldout shows how to connect the LCD panel to the different computersources.
