Asante FX4000 - Manual - manualsarea.com

Page 3 - Table of Contents

3 Table of Contents Chapter 1. Introduction 5 Key Features 5 Package Contents 5 Chapter 2. Product Overview 7 Front Panel 7 Optional Modules 7 FX40-8TP Module 8 FX40-2SMC15 Fiber Module 8 FX40-4MMC Fiber Module 9 FX40-1SX and FX40-1LX Gigabit Fiber Modules 9 FX40-1T Gigabit Module 10 Installing the ...

Page 5 - Chapter 1. Introduction; Key Features

5 Chapter 1. Introduction Thank you for purchasing the FriendlyNET FX4000 . This switch combines Ethernet, Fast Ethernet and Gigabit Ethernet capabilities in a single, rack mountable unit. Combining these interfaces allows the switch to unclog existing LANs and to provide an efficient, high speed ne...

Page 7 - Chapter 2. Product Overview; Front Panel

7 Chapter 2. Product Overview This chapter contains the following topics: • Physical Description • Optional Modules • Installing Optional Modules The FX4000 is a modular switch with four slots for optional modules. The LEDs are located on the front panels of the switch and modules to allow you to mo...

Page 9 - FX40-4MMC Fiber Module; FX40-1SX and FX40-1LX Gigabit Fiber Modules

9 FX40-4MMC Fiber Module When installed into a switch, this module provides 4 x 100 Mbps Fast Ethernet fiber ports that can be used to connect the switch to the network backbone, a 100 Mbps server or end station. A SC connector provides the link to the multi mode fiber cabling, and there are 2 LEDs ...

Page 10 - FX40-1T Gigabit Module; Installing the FX40 Optional Modules; OFF; NOT; Important

Asanté FriendlyNET FX4000 10 FX40-1T Gigabit Module When installed into a switch, the FX40-1T Gigabit module provides one Gigabit Ethernet port that can connect the switch to a Gigabit backbone switch or to a server with a Gigabit NIC adapter card. The module comes with a 10/100/1000 Mbps Nway auton...

Page 11 - Chapter 3. Installation; Mounting the Switch; Desktop Installation; Rack Mounting; Supplying Power; Note

11 Chapter 3. Installation This chapter describes the basic installation of the switch. Mounting the Switch The switch is suitable for use in an office environment where it can be rack mounted in standard EIA 19-inch racks or it can stand alone. Desktop Installation 1. Set the switch on a sufficient...

Page 12 - Connecting the Switch

Asanté FriendlyNET FX4000 12 Connecting the Switch You can connect your switch to network devices, such as desktops, workgroups or to other hubs. Before connecting to a desktop or workgroup, ensure that the following cabling requirements are met: 1. The 10BaseT Ethernet cable is Category 3 or better...

Page 13 - Appendix A. Specifications

13 Appendix A. Specifications The table below lists the specifications of the FriendlyNET FX4000 and the FX40 modules. Standards Compliance 802.3 10BaseT 802.3u 100BaseTX/FX 802.3z 1000BaseSX 802.3ab Gigabit 1000BaseT 802.3x Flow Control and Backpressure Power 100-240VAC 50/60Hz Consumption: 30-42 W...

Page 15 - Appendix B. FCC and Warranty Statements; FCC Statement

15 Appendix B. FCC and Warranty Statements FCC Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment ...

Asante FX4000 - Manual

Table of Contents:

Summary

Other Asante Models