Ariston aqm9d-29d - Manual

AUS 5 WASH CYCLE SELECTOR knob Button with ON/OFF indicator light Touch control panel Button with ON/OFF indicator light: press this briefly to switch the machine on or off. The green indicator light indicates that the machine is switched on. To switch off the washer-dryer during the wash cycle, pre...

AUS 6 WARNING: before you use the washer-dryer for the first time, run a wash cycle with detergent and no laundry, using the 90° cottons cycle without pre-wash.1. SWITCH THE MACHINE ON. Press the button. All the indicator lights will illuminate for 1 second and the text AQUALTIS will appear on the d...

AUS 7 Wash options Super Wash This option offers a high- performance wash due to the greater quantity of water used in the initial phase of the cycle, and due to the increased wash cycle duration, is particularly useful for the removal of stubborn stains. It can be used with or without bleach. If yo...

AUS 8 Detergents and laundry Detergent The type and quantity of detergent required depend on the type of fabric you are washing (cotton, wool, silk, etc.), as well as its colour, the washing temperature, the level of soiling and the hardness of the water in the area. Measuring out the detergent care...

AUS 9 Precautions and tips The machine was designed and constructed in accordance with international safety regulations. The following information is provided for safety reasons and must therefore be read carefully. General safety • This appliance is not intended for use by persons (including childr...

AUS 10 Opening the porthole door manually In the event that it is not possible to open the porthole door due to a powercut, and if you wish to remove the laundry, proceed as follows: 1. remove the plug from the electrical socket. 2. make sure the water level inside the machine is lower than the door...

AUS 11 Care and maintenance 1 2 Cutting off the water and electricity supplies • Turn off the water tap after every wash cycle. This will limit wear on the hydraulic system in the machine and help to prevent leaks. • Unplug the appliance when cleaning it and during all maintenance work. Cleaning the...

AUS 12 Trouble shooting Your washer-dryer could occasionally fail to work. Before contacting the Technical Assistance Centre ( see “Assistance” ), make sure that the problem cannot be not solved easily using the following list. Problem: The washer-dryer does not switch on. The wash cycle does not st...

AUS 13 Before calling for Assistance: • Check whether you can solve the problem by yourself (see “Trouble shooting” ); • Restart the wash cycle to check whether the problem has been solved; • If it has not, contact the Authorised Technical Assistance Service. If the washer-dryer has been installed o...