Aquatic AI37AIR6638 - Manual

97

SPECIFICATIONS:

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

www.aquaticwhirlpools.com 800.555.5324

September 2008

Rough-In Plumbing
Measurements

GeneRal SPecIfIcatIonS:

Tub Size

66” x 38” x 29”

168 cm x 97 cm x 73 cm

Bathing Well

39” long

22” wide

19 1/4” interior depth

Maximum Water Depth 14”
Shipping Weight

285 lbs. / 129 kg

Tub Weight Filled

704 lbs. / 319 kg

Tub Only Weight

181 lbs. / 82 kg

Gallons to Overflow

63 gal. / 238 L

electRIcal SPecIfIcatIonS:

Blower/Heater

1 HP; 10.5 AMP; 120V

Requirement

15 AMP; 120V, separate circuit

required protected w/ Class A GFCI

•

Comfort Pillow - Oval or Rectangle

•

Waste and Overflow for Freestanding Models

- Chrome, Polished Brass, Satin Nickel, Polished Nickel,
Oil Rubbed Bronze or White

•

Premium Colors

All acrylic colors featured by Aquatic match the

industry’s leading fixture manufacturers.

oPtIonal equIPMent:

SErENITy 37

SErENITy

Air Baths

Model

# AI37AIR6638 / AI37AIR6638To (Tub only)

air Bath System:

- 60 Air Jets
- 1 HP Variable Speed, Remote Air Blower with 20-Minute Timer
- 600 Watt Air Heating System
- Electronic Control Package with Wave and Pulse Features
- Automatic Purge and Dry Cycle
- Waterproof Remote Control with infrared sensor and 25’ cord

aquatic quality features:

- Claw Feet Available in Chrome, Polished Brass, Satin Nickel,
Polished Nickel, Oil Rubbed Bronze and White

- Air Channels Lined with Antimicrobial Coating

- Extra Deep Bathing Well

- Durable, Easy to C

lean, Lucite® Cast Acrylic Surface

- Available in 8 Standard No-Charge Colors

ul & IaPMo listed, factory tested

limited lifetime Warranty

StandaRd equIPMent:

38”

Two Person Bath

4”

Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air temperature will
be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air coming from the air jets
will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.

fax-on-demand

document #1321

66”

29”

30”

26”

24 1/4”

Blower

Connection

3 1/2”

11”

note:

The interior of bathing well and outside of bathing well can each

be specified in a different color. Only one premium color upcharge will be

applied if one or more premium colors are used.

note:

This model requires a remote blower location. The connection for the

air blower is under the tub; the blower may be placed up to 15 feet away

and connected by piping under the floor. Please refer to the Owner’s Manual

for detailed installation instructions. Document #1184 on our Fax-on Demand
System or on our website at www.aquaticwhirlpools.com.