Apex External Charger - Manual
Apex External Charger – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Apex III External Charger Quick Start Guide; Figure 4: Power Supply AC Power Connection; Plug the AC Line cord into an AC power receptacle (refer to Figure 6).; Figure 6: AC Power Connection
- Page 3 – Figure 7: Battery Pack Orientation; External Charger Operation; Battery Pack Charging; longer than 15 minutes
- Page 4 – Apex III PDT/Battery Pack Notes; “Change Battery”; Battery Pack Life; COMPSEE
External Charger
Quick Start Guide
COAM30006
Rev. 1.02
11/22/00
1
Safety
q
DO NOT operate the Apex III External Charger in any location which could result in
the unit getting splashed, wet, or immersed in liquid.
q
DO NOT tamper or operate the Apex III External Charger if the case is perforated,
broken, or loosely held together.
q
DO NOT operate the Apex III External Charger in any outside location where it could
become exposed to the elements.
The Apex III External Charger has been designed
for indoor use only.
q
DO NOT attempt to charge any other type battery pack or batteries other than Apex
III Battery Packs with your Apex III Dock or Apex III External Charger.
q
ONLY use Compsee, Inc. approved cables and Power Supplies with your Apex III
products.
q
DO NOT touch more than one Battery Pack terminal at a time with any electrically
conductive material. A short across the Battery Pack terminals could result in the
sudden release of a large portion of the Battery Pack’s energy.
Unpacking And Initial Setup
1.
Remove the Apex III External Charger from the packing carton and inspect the unit to
ensure it is good physical condition after shipping.
Charge State LED
Indicating Light [One Per Side]
Figure 1: Apex III External Charger
2.
If you have ordered an External Charger Kit (Kit 1 or 2 – refer to the Support Section
of the External Charger User’s manual for part numbers and description), remove the
associated Power Supply and AC Line cable (if applicable) from the packing
container (refer to Figure 2 and Figure 3).
Figure 2: External Charger Power Supply
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Apex III External Charger Quick Start Guide COAM30006 Rev. 1.02 11/22/00 2 Figure 3: AC Line Cord (120 VAC Cord Shown) 3. Record the Unit Specific Information (External Charger and Power Supply Model andSerial numbers) in a location you will remember for future reference beforepermanently installing...
Apex III External Charger Quick Start Guide COAM30006 Rev. 1.02 11/22/00 3 Note: Battery Pack must be placed in the charging slot with Release Clip facingupwards and the four side charging terminals (and ridges) facing outwardtowards the side of the unit. This orientation applies to the insertion of...
Apex III External Charger Quick Start Guide COAM30006 Rev. 1.02 11/22/00 4 Note: Apex III Battery Packs use Nickel Metal Hydride (NiMH) composition, they DONOT succumb to memory (hysteresis) loss as do Nickel Cadmium (Ni-Cd)batteries. Apex III Battery Packs can therefore be charged while in any stat...