APC URTA48XLBPJ - Manual
APC URTA48XLBPJ – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Place the battery pack where it will be used.; Pre-installation Procedure; and battery modules
- Page 3 – Tower Installation; instruction may result in bodily injury or equipment damage.
- Page 5 – Rack-mount Installation; disconnected from the UPS.
- Page 6 – Go to “Battery Pack and UPS Connection Procedure” on page 7 to:; follow this instruction could result in cabling shortage.
- Page 7 – b. Install the UPS and battery pack battery covers; Battery Pack and UPS Connection Procedure; Connectors
- Page 9 – Terminal Mode Configuration; PowerChute; Operation and Troubleshooting
- Page 10 – protected from power outages.
- Page 11 – Service
APC Smart-UPS
®
RT SURTA48XLBP/SURTA48XLBPJ
External Battery Pack User Manual
Introduction/Before Installation
About this Manual
The APC Smart-UPS
®
RT external battery pack (SURTA48XLBP or SURTA48XLBPJ) connects to
the APC Smart-UPS RT uninterruptible power supply (SURTA1500XL and SURTA2000XL, or
SURTA1500XLJ). Together these units provide extended protection against blackouts, brownouts,
sags and surges reaching your computers, servers, and other sensitive electronic equipment.
Illustrations are representative. Your configuration, including components and optional APC equip-
ment, may be different from the models shown in this manual. The user manual is accessible from the
supplied CD and the APC Web site,
www.apc.com
.
Contact Information
Refer to
www.apc.com
to contact APC or for additional information about this product.
Safety Information
Unpacking and Equipment Placement
1. Unpack the equipment. The packaging is recyclable; save it for reuse or dispose of it properly.
2. Inspect the equipment upon receipt. Notify the carrier and dealer if there is damage.
3. Check the package contents:
– the battery pack and front bezel
– a literature kit containing user manual, two clips, two stabilizing foot extensions with
hardware, product documentation, warranty documentation, and safety information.
Warn in g
Read the Safety Guide before you begin the installation, operate the battery pack,
or perform equipment maintenance. Failure to comply with safety instructions
could result in bodily injury or equipment damage.
To lighten the load, remove battery modules before installing equipment, or when
transporting the equipment to another location.
Heavy
The equipment is heavy. Two people are required to lift the UPS or battery pack.
Select a location sturdy enough to handle the weight of the equipment.
Note
The battery pack is shipped with the battery modules installed. Battery modules are
shipped DISCONNECTED to be in compliance with U.S. Department of
Transportation (DOT) regulations.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Pre-installation Procedure 2 Smart-UPS RT SURTA48XLBP/SURTA48XLBPJ External Battery Pack User Manual 4. Place the battery pack where it will be used. – Ensure that air vents on the front and rear of the unit are not blocked.– Do not operate the battery pack where there is excessive dust or the tempe...
Tower Installation Smart-UPS RT SURTA48XLBP/SURTA48XLBPJ External Battery Pack User Manual 3 Tower Installation 1. Complete this step if this is a new installation of the UPS with battery pack(s). a. Place the UPS on its side to remove the battery. To remove the battery, refer to the “Battery Replac...
Rack-mount Installation Smart-UPS RT SURTA48XLBP/SURTA48XLBPJ External Battery Pack User Manual 5 c. Install and connect the battery pack battery modules. d. Install the battery pack covers and bezel . 5. Go to “Terminal Mode Configuration” on page 9 to configure the UPS to recognize the bat...
