APC CTEG4M - Manual
APC CTEG4M – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Chapter 1 General Information; Safety; Changes and modifications to this unit not expressly; Do not work alone under hazardous conditions.
- Page 4 – Specifications; Environmental Specifications; Operating Temperature; % to 95% noncondensing within enclosure; Physical Specifications; Characteristic Specification; Height
- Page 5 – Chapter 2 Installation and Maintenance; Models Supported; CTEG4M; Unpacking
- Page 6 – Battery Tray
- Page 7 – Installing the CTEG Enclosure; Wiring; Grounding; electrical code requirements.; Input Wiring; and L2. Ensure that sufficient service loops are available.; Output Wiring; Attach the ground wires to the cables.; Installing the Power Supply; Options; Contact APC for information on available options.
- Page 8 – Connecting the Batteries; Tape one end of each jumper cable prior to installation.; FRONT
- Page 11 – Chapter 3 Service, Contact and Warranty Information; Service; Support
990-5521
07/02
BroadBand CTEG4M Series
Power Supply and Battery Enclosures
User’s Manual
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 Chapter 1 General Information The CTEG4M Series Enclosures provide power source housing for broadband cable operations. Safety This Safety Guide contains important instructions that should be followed during installation and maintenance of the APC equipment and batteries. It is intended for APC cu...
2 Specifications Environmental Specifications Operating Temperature -40º F to 140º F (-40º C to 70º C) Humidity 5% to 95% noncondensing within enclosure Physical Specifications Characteristic Specification Height 31” (79 cm) Width 35” (89 cm) Depth 25” (64 cm) Weight CTEG4M CTEG8M/12B 120 lbs (54 kg...
3 Chapter 2 Installation and Maintenance Only trained service personnel should install and maintain the Power Supply. Prior to installing the enclosure AC line voltage must be routed to the installation site. Local, state, federal and/or National Electric Code (NEC) regulations regarding location, p...
