APC CTEG4-240MB-5 - Manual
APC CTEG4-240MB-5 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – General Information; The American Power Conversion (APC; Safety; Do not work alone under hazardous conditions.; Batteries must be recycled.; Deliver the battery to an appropriate recycling
- Page 4 – Installation; Specifications; Operating Temperature; Physical Specifications; Characteristic Specification; Height X Width X Depth; Unpacking; for more information.
- Page 5 – Wiring; Grounding
- Page 6 – Connecting the Batteries; Tape one end of each jumper cable prior to installation.; Overview
- Page 7 – Service, Contact and Warranty Information; Service; Contact APC Customer Service through the APC Web site,; How to Contact APC; Refer to the APC Web site,; Limited Warranty
990-2480
07/2006
Broadband
CTEG4-240MB-5
Four Battery Ground Mount Enclosure
240 V
User Manual
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 General Information The American Power Conversion (APC ) CTEG Enclosure provides power sourcing for broadband cable operations. Safety This Safety Guide contains important instructions that should be followed during installation and maintenance of the APC equipment and batteries. It is intended ...
2 Installation Utility line voltage must be routed to the enclosure. Local, state, federal and/or National Electric Code (NEC) regulations regarding location, permits and electrical wiring must be adhered to. Do not operate the power supply where the temperature and humidity are outside the specifie...
3 Wiring Grounding Install and interconnect ground rods appropriate for proper grounding according to local electrical code requirements. Connecting Utility Power to the Enclosure 1. Unlock and open the door of the enclosure. 2. Ensure that the utility power switch is OFF. 3. Install a high magnetic...
