Page 3 - Contents
Contents Three-Phase Rack PDU — Installation and Operation Manual i Product Description and Inventory . . . . . . . . . . . . . . . . . . . . . . 1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 5 - Product Description and Inventory
Three-Phase Rack PDU — Installation and Operation Manual 1 Product Description and Inventory Description This manual provides information on installing and operating three Rack PDUs (AP7601, AP7602, and AP7608), which mount vertically in the rear channel of an APC NetShelter VX Enclosure. Each of th...
Page 7 - How to Install the Rack PDUs; Installation guidelines; Mounting options
Three-Phase Rack PDU — Installation and Operation Manual 3 How to Install the Rack PDUs Installation guidelines • If the PDU is installed in an enclosed communications rack, the recommended maximum ambient temperature should be no greater than 45°C. • Install the PDU so that the amount of air flow r...
Page 8 - Toolless mounting
How to Install the Rack PDUs 4 Three-Phase Rack PDU — Installation and Operation Manual Toolless mounting 1. Slide the mounting pegs into the holes provided in the channel in the rear panel of the enclosure. Make sure the bottom pegs slide into the bottom holes in the enclosure. 2. Snap the Rack PDU...
Page 11 - Configuration; Username
Three-Phase Rack PDU — Installation and Operation Manual 7 Configuration How to configure the PDU through a serial port 1. Connect an available serial port on your computer to the serial port on the Rack PDU, using the supplied configuration cable (990-0144). The PDU’s serial port is shown below. 2....
Page 12 - Using the menus
Configuration 8 Three-Phase Rack PDU — Installation and Operation Manual Using the menus To view a menu, type the associated number and press E NTER . Users can view all data, but only administrators can configure parameters. The main menu has the following options: Status Information option Status ...
Page 13 - Rack PDU Configuration; Device Data option
Configuration Three-Phase Rack PDU — Installation and Operation Manual 9 Rack PDU Configuration option Rack PDU Configuration , main menu option 2, provides the following options: Settings are displayed for each phase. • To change a warning and alarm threshold, type the number of the setting, press ...
Page 14 - Factory Data option; Factory Data; Logout option
Configuration 10 Three-Phase Rack PDU — Installation and Operation Manual To change as setting: 1. Type 1 , and press E NTER to move the arrow cursor to the next setting. 2. Type 2 , and press E NTER to change the selected setting. 3. Type the new value, and press E NTER . Factory Data option Factor...
Page 15 - Operation; Display interface
Three-Phase Rack PDU — Installation and Operation Manual 11 Operation Display interface Control button:• Press to change the phase of the current displayed on the digital display. • Press and hold for five seconds to view the orientation; hold for an additional five seconds to change the orientation...
Page 16 - Alarm conditions
Operation 12 Three-Phase Rack PDU — Installation and Operation Manual Alarm conditions You configure warning and alarm limits through the internal menus, using a serial port connection. The Rack PDU shows warning and alarm conditions as follows: Phase Indicator LED Displays yellow for a warning and ...
Page 17 - Wiring Options
Three-Phase Rack PDU — Installation and Operation Manual 13 Wiring Options Hardwiring procedure (optional) Remove the power cord. 1. Detach the inspection cover on the power inlet end of the Rack PDU by removing the four screws on the sides of the cover and tilting the cover upward so that the termi...
Page 19 - Specifications
Three-Phase Rack PDU — Installation and Operation Manual 15 Specifications Electrical AP7601 AP7602 AP7608 Input 100 –120/173 –208 V, 3 φ 16 A NEMA L21-20 plug; 3 ft power cord Output 100 – 120 V, 3 × 16 A 100 –120/173 – 208 V, 3 × 16 A 173–208 V, 3 × 16 A 42 NEMA 5-20R receptacles 21 NEMA 5-20R rec...
Page 20 - How to Download Firmware Updates
16 Three-Phase Rack PDU — Installation and Operation Manual How to Download Firmware Updates You can use a local computer that connects to the Rack PDU through the serial port on the front of the unit. 1. Select a serial port at the local computer, and disable any service that uses that port. 2. Use...
Page 21 - Warranty and Service; Limited warranty
Three-Phase Rack PDU — Installation and Operation Manual 17 Warranty and Service Limited warranty APC warrants the PDU to be free from defects in materials and workmanship for a period of two years from the date of purchase. Its obligation under this warranty is limited to repairing or replacing, at...
Page 23 - Radio Frequency Interference
Radio Frequency Interference This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial e...
Page 24 - APC Worldwide Customer Support
APC Worldwide Customer Support Customer support for this or any other APC product is available at no charge in any of the following ways: • Visit the APC Web site to find answers to frequently asked questions ( FAQ s), to access documents in the APC Knowledge Base, and to submit customer support req...
