A.O. Smith DEN - Manual
A.O. Smith DEN – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – INSULATION BLANKETS; WARNING; Do not cover the temperature & pressure relief valve.; EXTENDED NON-USE PERIODS; CAUTION; CAUTION; WARNING; REQUIRED ABILITY
- Page 4 – CLEARANCES; FLOOD WARNING; CHEMICAL VAPOR CORROSION; DO NOT; BRANCH CIRCUIT
- Page 5 – WIRING DIAGRAMS; ELEMENT HEATERS; A-8 CIRCUIT FOR DUAL ELEMENT HEATER
- Page 6 – TYPICAL PIPING CONNECTIONS; TEMPERATURE AND PRESSURE RELIEF VALVE
- Page 7 – OPERATION; FILLING; TEMPERATURE REGULATION; DANGER; Temperature; TEMPERATURE ADJUSTMENT; FIGURE 4; Turn off the heater electrical supply. Do not attempt to adjust
- Page 8 – BECAUSE THE HIGH LIMIT OPERATES ONLY; FIGURE 5; TROUBLESHOOTING
- Page 9 – NOTES
- Page 10 – LEAKAGE CHECKPOINTS; Instructions; NOTE: Cover and Insulation shown removed to reveal tank top
- Page 11 – MODELS DEN AND DEL ELECTRIC WATER HEATER LIMITED WARRANTY
1
COMMERCIAL ELECTRIC WATER HEATERS
Printed in U.S.A. 0704
PART NO. 195201-000
MODELS DEN AND DEL
•
Installation
•
Electrical
•
Wiring Diagrams
•
Replacement Parts
•
Operation
•
Maintenance
•
Leakage Checkpoints
•
Limited Warranty
A DIVISION OF A. O. SMITH CORPORATION
McBee, South Carolina, USA
w w w.hotwater.com
CAUTION
TEXT PRINTED OR OUTLINED IN RED CONTAINS INFORMATION RELATIVE TO YOUR SAFETY.
PLEASE READ THOROUGHLY BEFORE INSTALLING AND USING THIS APPLIANCE.
PLACE THESE INSTRUCTIONS ADJACENT TO HEATER AND NOTIFY OWNER TO KEEP FOR FUTURE REFERENCE.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 FOREWORD Thank you for buying this energy efficient water heater fromA.O. Smith Water Products Company. We appreciate yourconfidence in our products. Detailed installation diagrams arein this manual. These diagrams will serve to provide the installerw i t h a r e f e r e n c e f o r t h e m a t e ...
4 CLEARANCES A minimum clearance of 4” must be allowed for access toreplaceable parts such as the thermostats, drain valve and reliefvalve. Adequate clearance for servicing this appliance should beconsidered before installation, such as changing the anodes,etc. FLOOD WARNING IF THE HEATER BECOMES IM...
5 WIRING DIAGRAMS C-2 CIRCUITFOR SINGLE ELEMENT HEATERS EQUIPPED WITH HIGH LIMIT CONTROL Size Temperature Rating of Conductor See Table 310-13 in Code AMG 60° C 75° C MCM (140° F) (167° F) TYPES: TYPES: RUW RH, RHW, RUH, (14-2), (14-2), THW T, TW, THWN, XHHW, UF USE 18 - - - - - - 16 - - - - - - 14 ...
