A.O. Smith BTX-100 - Manual
A.O. Smith BTX-100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Commercial Gas Water Heaters
96% THERMAL EFFICIENCY
VERSATILE POWER DIRECT-VENT
BTX-100
Page 1 of 2
AOSCG10101
April 2008
The Cyclone Xi™ is a light-duty, power direct-vent, fully condensing commercial gas water
heater with an internal helical heat exchanger. This helical heat exchanger helps Cyclone Xi
achieve 96% thermal efficiency and deliver outstanding hot water output.
HELICAL INTERNAL HEAT EXCHANGER
n
Completely surrounded by water in tank, provides much greater heat transfer
surface than standard straight flue tube
n
Produces 96% thermal efficiency, which saves money on operating costs,
increases hot water output compared to standard-efficiency water heaters
n
Minimizes standby losses by trapping heat in the tank
VERSATILE POWER DIRECT-VENT DESIGN
n
Power Direct-Vent System allows up to 120 feet using PVC, CPVC, or ABS pipe. Can be
vented vertically thru-the-roof or horizontally thru-the-wall
n
2” pipe, vents up to 20 equivalent feet
n
3” pipe, vents up to 60 equivalent feet
n
4” pipe, vents up to 120 equivalent feet
n
Optional concentric vent kit available
CONDENSING DESIGN
n
96% efficient condensing deign
n
Equipped with condensate drain tee
HIGH OUPUT WITH SMALL FOOTPRINT
n
22” diameter, combined with 96% efficiency, 50-gallon tank and 100,000 BTU
input means Cyclone Xi can be installed in less space than a larger 75-gallon
unit, with equal or better performance
n
Total height is 68-1/2” to top of unit
SIDE-MOUNTED HOT AND COLD RECIRCULATING TAPS
n
Allows Cyclone Xi to be installed as part of combination space heating/water
heating applications, or any system requiring a recirculating hot water loop
n
Plugs for the recirculating taps are factory installed
ADVANCED ELECTRONIC CONTROL
n
Large LCD display
n
Precise temperature control
n
Advanced diagnostics
PERMAGLAS
®
ULTRA COAT™ GLASS LINING
n
A. O. Smith exclusive process provides superior protection against corrosion
n
Protects all interior tank surfaces including inside and outside of helical
heat exchanger
TWO HEAVY-DUTY ANODE RODS
n
Provides advanced protection against corrosion
AVAILABLE IN NATURAL GAS AND PROPANE
TOP FIRED LOW-NOX GREEN CHOICE
®
GAS BURNER
n
“Eco-friendly” design reduces NOx emissions
and complies with Southern California and Texas requirements
FACTORY-INSTALLED TEMPERATURE AND PRESSURE RELIEF VALVE
MAXIMUM HYDROSTATIC WORKING PRESSURE: 150 PSI
CODES AND STANDARDS
n
Design-certified by UL (Underwriters Laboratories) according to
ANSI Z21.10.3-CSA4.3 standards governing storage-type water heaters
n
These models meet or exceed the thermal efficiency and standby loss requirements of
ASHRAE 90.1 (current standard)
GAS-FIRED
GAS-FIRED
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
