Antec Mini P180 White - Manual

Antec Mini P180 White

Antec Mini P180 White – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – Mini P180 / Mini P180 White User’s Manual; Setting Up; Don’t use your fingernails to pry or lift the panels.; Installing the power supply; With the case upright, install the power supply into the case.; Disclaimer
  • Page 3 – Power Switch (labeled POWER SW) connects to the PWR connector on; Connecting the USB Ports
  • Page 5 – We recommend using the top 5.25” drive bay for your main 5.25” device.; ” Device Installation
  • Page 7 – Tug the filter away from the case and then slide it out.
  • Page 8 – Europe
Loading the manual

Mini P180 / Mini P180 White

User’s Manual

Manuel de l’utilisateur
Anwenderhandbuch
Manuale per l’operatore
Manual del usuario

পᡅ䂀ᯢ᳌

Ё᭛Փ⫼᠟ݞ

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Mini P180 / Mini P180 White User’s Manual; Setting Up; Don’t use your fingernails to pry or lift the panels.; Installing the power supply; With the case upright, install the power supply into the case.; Disclaimer

1 At Antec, we continually refine and improve our products to ensure the highest quality. As such your new case may differ slightly from the descriptions in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illustrations in ...

Page 3 - Power Switch (labeled POWER SW) connects to the PWR connector on; Connecting the USB Ports

2 Installing the Motherboard This manual does not cover CPU, RAM, or expansion card installation. Please consult your motherboard manual for specific mounting instructions and troubleshooting. 1. Lay the case down, with the open side facing up. The drive cages and power supply area should be visible...

Page 5 - We recommend using the top 5.25” drive bay for your main 5.25” device.; ” Device Installation

4 case. Inside the case there are two 3.5” drive cages located in the upper chamber, which can house up to five hard drives. Note: We recommend using the top 5.25” drive bay for your main 5.25” device. 5.25” Device Installation There are three 5.25” drive bays that need a pair of drive rails for eac...

Other Antec Models

All Antec Other