Analog Devices ADXL345 - Manual
Analog Devices ADXL345 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – REVISION HISTORY
- Page 3 – SOFTWARE CONFIGURATION; Installing the USB Drivers for the ISEB; Installing the LabVIEW and NI-VISA Run-Time Engines
- Page 4 – Evaluation Board User Guide; HARDWARE CONFIGURATION; To configure the hardware, follow these steps:
- Page 5 – UPDATING/REPAIRING THE ISEB FIRMWARE
- Page 6 – CONFIGURATION TAB
- Page 7 – REAL-TIME MEASUREMENT TAB
- Page 8 – INTERRUPT CONFIGURATION TAB
- Page 9 – POWER CONSUMPTION TAB; Power Consumption; Micro In Calculation
- Page 10 – TEMPERATURE TAB
- Page 11 – ESD CAUTION
Evaluation Board User Guide
UG-015
One
Technology
Way
•
P.O.
Box
9106
•
Norwood,
MA
02062-9106,
U.S.A.
•
Tel:
781.329.4700
•
Fax:
781.461.3113
•
www.analog.com
i
MEMS ADXL345 Inertial Sensor Evaluation System
Please see the last page for an important warning and disclaimers.
Rev. 0 | Page 1 of 12
FEATURES
Ultralow power
accelerometer
Inertial sensor evaluation board
Inertial sensor-specific satellite for evaluation
Standard USB cable for power and communications
PC-based graphical user interface (GUI)
Separates DUT from controller for accurate environmental
testing
08
11
9-
00
1
Figure 1. Inertial Sensor Evaluation System
GENERAL DESCRIPTION
The
i
MEMS® ADXL345 inertial sensor evaluation system
is an easy-to-use evaluation tool targeting bench or desktop
characterization of Analog Devices, Inc., inertial sensor products.
The system consists of the inertial sensor evaluation board (ISEB),
or main board, and a satellite board for any Analog Devices
inertial sensor product. The ISEB connects directly to a PC via
its USB, where the USB connection provides both power and
communications to the board. The ISEB then connects to the
satellite board through a ribbon cable. This cable allows the
satellite to be easily manipulated for testing or for being separately
placed into an environmental chamber for temperature or
humidity testing. Separating the boards mitigates corruption
of data due to the temperature and humidity effects of other
components.
The ISEB is a universal main board and is intended to be used
with various satellites of Analog Devices inertial sensors, including
analog and digital accelerometers, as well as gyroscopes. The
different products are evaluated by means of separate GUIs that are
customized for performance and characterization measurements
relevant to the inertial sensor being evaluated.
The EVAL-ADXL345Z-M system contains the ISEB and the
EVAL-ADXL345Z-S satellite. Also included is a USB A to
Mini-B cable to connect the ISEB to a PC and an 18-inch,
20-pin ribbon cable to connect the ISEB to the satellite. A CD
is also included with the necessary drivers and executables to
use the system and to quickly begin evaluating the ADXL345.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
UG-015 Evaluation Board User Guide Rev. 0 | Page 2 of 12 TABLE OF CONTENTS Features .............................................................................................. 1 General Description ......................................................................... 1 Revision History .....
Evaluation Board User Guide UG-015 Rev. 0 | Page 3 of 12 INERTIAL SENSOR EVALUATION SYSTEM SETUP SOFTWARE CONFIGURATION Software configuration of the inertial sensor evaluation system involves installation of USB drivers for the ISEB and National Instruments LabVIEW® Run-Time and NI-VISA™ Run-Time f...
UG-015 Evaluation Board User Guide Rev. 0 | Page 4 of 12 HARDWARE CONFIGURATION To configure the hardware, follow these steps: 1. Plug the USB A to Mini-B cable into the PC, if the cable is not already connected. 2. Connect the ISEB to the USB cable. If prompted to install the device, see the Softwa...
