American DJ Light Station - Manual
American DJ Light Station – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Figure 1; Function and Controls - Front Panel; Figure 2
- Page 4 – Function and Controls - Rear Panel
- Page 5 – Operating Instructions; Running Chase Patterns:
- Page 6 – To program in an override:
- Page 7 – Recalling an ASSIGN PATTERN:
- Page 8 – Controller Reset and Memory Dump:
American DJ
®
LIGHT STATION
User Instructions
American DJ Supply
4295 Charter Street
Los Angeles Ca 90058
(323) 582-2650
(323) 582-2610
www.americandj.com
Introduction:
Thank you for purchasing the Light Station™
DMX controller from American DJ
®
. To optimize the performance
of this product, please read these operating instructions carefully to
familiarize yourself with the basic operations of this unit. The Ameri-
can DJ
®
Light Station™ is a unique, 16 channel programmable DMX
controller with MIDI capabilities. This unit features 60 programs, 30
built in programs and 30 that you can create yourself. This unit also
comes with a memory back up battery to save and retain your data.
This unit has been tested at the factory before being shipped to you,
there is no assembly required.
Customer Support:
American DJ provides a toll free customer support line, to provide
set up help and to answer any question should you encounter prob-
lems during your set up or initial operation. You may also visit us on
the web at www.americandj.com for any comments or suggestions.
Service Hours are Monday through Friday 10:00 a.m. to 5:00 p.m.
Pacific Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2610
E-mail:
Warning!
To prevent or reduce the risk of electrical shock or fire,
do not expose this unit to rain or moisture. Clearing memory often
may cause damage to the memory chip, be careful not to re initial-
ize your unit frequency often to avoid this risk. Only use the recom-
mended AC/DC power adaptor.
Caution!
There are no user serviceable parts inside this unit. Do
not attempt any repairs yourself, doing so will void your manufac-
tures warranty. In the unlikely event your unit may require service,
please contact your nearest American DJ dealer.
Conformity:
This product complies to EN 50081-1/EN 55022
pr EN 55103-1 (EMC emission) and EN 50082-1/EN 61000-4-2 pr
EN 55103-2 (EMC immunity).
©American DJ Suply® www-americandj.com Light Stantion Instruction Manual Page 2
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
XLR MALE SOCKET 1 EARTH HOT 2 3 COLD XLR FEMALE SOCKET 1 EARTH HOT 2 3 COLD XLR Pin Configuration: Pin 1 = Shield Pin 2 = Data Compliment (negative) Pin 3 = Data True (positive) Set Up: Power Supply: Before plugging your unit in be sure the source volt- age in your area matches the required voltage ...
20. Step Up/Cross Setup Button: This has two functions: 1. In manual chase or program modes, this button is used to select the next step, (scene) in the pattern. The current step will be displayed by the right two digits in the LCD display (6). Holding down this button will quickly advance through t...
accomidate the use of some older European fixtures. 33. DMX XLR Output: A maximum of 96 DMX channel output. This is the DMX signal output. This is a 3 pin XLR connector. If connecting to a 5 pin XLR input connector you must use a 3-5 pin adaptor. 34. Midi Thru: This connection is used to connect the...
