American Audio 250HP - Manual
American Audio 250HP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Quick Start; Show Designer,TM or the Elation; Features; Master/Slave Quick Start Stand Alone Mode; Safety Precautions
- Page 3 – Set Up; Be sure to follow figures two and three when making your own; DMX Addressing; DMX CHANNEL; ON
- Page 4 – You can use the DJ Scan 250HP
- Page 5 – Lamp Replacement; Lamp Replacement:; connections to any standard DMX controller. Set dipswitch #1 to; Focusing; sensitivity knob to its minimum position.
- Page 6 – Trouble Shooting; Unit does not respond to sound; Cleaning
- Page 7 – Channel; Gobo Layout; P rogra m2; Narrow Program
- Page 8 – Warranty; -YEAR LIMITED WARRANTY; Specifications: DJ Scan 250HPTM; * Operating voltage is preset at the factory.; Specifications and improvements in the design of
User Instructions
American DJ
4295 Charter Street
Los Angeles, CA 90058
www.americandj.com
DJ Scan 250HP™
Introduction
©
American DJ Supply
®
- www.americandj.com - DJ Scan 250HP™ User Manual Page 2
Introduction:
Congratulations and thank you for purchasing the DJ
Scan 250HP™ by American DJ
®
, one of the finest pieces of its kind
on the market today! The DJ Scan 250HP™ is a great inexpensive,
light weight, intelligent fixture. Due to it’s physical specifications, it’s a
great piece for mobile DJ’s, roller rinks, small clubs, bars, and bowling
centers. When used in multiples of two or more, these units create an
effect that rivals that of units that can cost up to three times the price.
The DJ Scan 250HP™ was designed to run in a Master/Slave mode
but can be used with any universal DMX-512 controller.
Customer Support:
American DJ
®
provides a toll free customer sup-
port line, to provide set-up and installation help and to answer any
question should you encounter problems during your set up or initial
operation. You may also visit us on the web at www.americandj.com
for any comments or suggestions. Toll free customer service hours are
Monday through Friday 9:00 a.m. to 5:30 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2610
E-mail:
To purchase parts online visit http://parts.americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
American DJ
®
customer support.
Please recycle the shipping carton when ever possible
.
Improvements and changes in specifications and design to this
manual and unit may be made at any time without prior notice.
HALOGEN LAMP WARNING!
This fixture is fitted with a halogen lamp which is highly susceptible to
damage if improperly handled. Never touch the lamp with your bare
fingers as the oil from your hands will shorten the lamp life. Never
install, mount, or place this fixture in areas prone to heavy vibration.
Also, never move the fixture until the lamp has had ample time to
cool. Remember, lamps are not covered under warranty conditions.
Rev. 2/06
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
© American DJ Supply ® - www.americandj.com - DJ Scan 250HP™ User Manual Page 4 © American DJ Supply ® - www.americandj.com - DJ Scan 250HP™ User Manual Page 3 DJ Scan 250HP™ Quick Start The DJ Scan 250HP™ features a bright 250 watt halogen bulb with a separate gobo and color wheel. The color wheel ...
Unpacking: Every DJ Scan 250HP™ has been thoroughly tested and has been shipped in perfect operating condition, there is no assembly neces-sary. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, care-fully inspect your unit fo...
4. Turn the master unit dipswitchws to the “Off” position.5. Please follow chart on page 13 for all master/slave dipswitch settings. Note only one fixture may use the master units dipswitch settings. 6. After all the units settings have been set and are plugged in, adjust the sensitivity knob on the...
