Page 2 - Important Notices for Servicers and Consumers; Customer Service Support Center; DANGER; W A R N I N G; C A U T I O N; I m p o r t a n t I n f o r m a t i o n
2 16021518 Rev. 0 ©2002 Maytag Appliances Company Important Notices for Servicers and Consumers Maytag will not be responsible for personal injury or property damage from improper service procedures. Pride andworkmanship go into every product to provide our customers with quality products. It is pos...
Page 3 - Table of Contents
©2002 Maytag Appliances Company 16021518 Rev. 0 3 3 Important Information ................................................ 2Important Product Information .................................... 4Important Safety Information ...................................... 5General Information Placement of the Ov...
Page 4 - Important Product Information; Earthing Instructions; WARNING; Servicing of Earthed Products; WARNING; Wiring
4 16021518 Rev. 0 ©2002 Maytag Appliances Company Important Product Information WARNING ! To avoid risk of electrical shock, injury, or death, makesure these earthing instructions are followed. Earthing Instructions WARNING ! Do not remove earthing prong when installing earthedappliance in a home or...
Page 5 - Important Safety Information
©2002 Maytag Appliances Company 16021518 Rev. 0 5 Important Safety Information
Page 8 - CAUTION
8 16021518 Rev. 0 ©2002 Maytag Appliances Company CAUTION ! Read the following information to avoid possibleexposure to microwave radiation: The basic design of the Amana or Menumastermicrowave ovens make it an inherently safe device toboth user and servicer. However, there are someprecautions which...
Page 9 - General Information; Placement of the Oven; Radio Interference
General Information ©2002 Maytag Appliances Company 16021518 Rev. 0 9 Placement of the Oven Do not install microwave next to or above source ofheat, such as a deep fat fryer. This could cause themicrowave to operate improperly and could shorten thelife of electrical components. Install microwave on ...
Page 10 - Electrical Power Cord; Service
General Information 10 16021518 Rev. 0 ©2002 Maytag Appliances Company Equipment requires a 230 VAC, 50 Hz, 13 amp power supply Receptacle Plug Equipment requires a 230 VAC, 50 Hz, 16 amp power supply Electrical Power Cord Model Identification When contacting provide product information located onra...
Page 11 - Component Testing Procedures; IN
Component Testing Procedures ! WARNING To avoid risk of electrical shock, personal injury, or death, disconnect power to oven and discharge capacitorbefore servicing, unless testing requires it. ©2002 Maytag Appliances Company 16021518 Rev. 0 11 Illustration Component Test Results Thermal cutout Dis...
Page 13 - Traditional Power Test Temperature Chart
Component Testing Procedures ! WARNING To avoid risk of electrical shock, personal injury, or death, disconnect power to oven and discharge capacitorbefore servicing, unless testing requires it. ©2002 Maytag Appliances Company 16021518 Rev. 0 13 ! WARNING To insure proper functioning of the interloc...
Page 14 - Proper Handling of Magnetron Tubes; Magnetron Failure Modes
Service Information ! WARNING To avoid risk of electrical shock, personal injury, or death, disconnect power to oven and discharge capacitorbefore servicing, unless testing requires it. 16021518 Rev. 0 ©2002 Maytag Appliances Company 14 Proper Handling of Magnetron Tubes CAUTION ! A magnetron tube, ...
Page 15 - Equipment
Service Information ! WARNING To avoid risk of electrical shock, personal injury, or death, disconnect power to oven and discharge capacitorbefore servicing, unless testing requires it. ©2002 Maytag Appliances Company 16021518 Rev. 0 15 WARNING ! Check for radiation leakage after servicing. Should t...
Page 16 - Troubleshooting; Radiation Monitor
Troubleshooting ! WARNING To avoid risk of electrical shock, personal injury, or death, disconnect power to oven and discharge capacitorbefore servicing, unless testing requires it. 16021518 Rev. 0 ©2002 Maytag Appliances Company 16 Operating Instructions for the Narda8110B Radiation Monitor Purpose...
Page 18 - Troubleshooting Guide
18 16021518 Rev. 0 ©2002 Maytag Appliances Company CAUTION ! All repairs as described in this section are to be performed only after the listed caution procedures listed belowhave been followed. • Check grounding before checking for trouble.• Be careful of the high voltage circuit.• Discharge high v...
Page 20 - Disassembly Procedures; Outer Case Removal; CAU TION; Control Assembly (stainless steel models); Oven Light Removal
Disassembly Procedures To avoid risk of electrical shock, personal injury, ordeath, disconnect power to oven and dischargecapacitors before following any disassembly procedure. WARNING ! 20 16021518 Rev. 0 ©2002 Maytag Appliances Company Access to major electrical components can only begained by rem...
Page 21 - Splatter Shield Removal; Blower Motor or Wheel Removal
Disassembly Procedures To avoid risk of electrical shock, personal injury, ordeath, disconnect power to oven and dischargecapacitors before following any disassembly procedure. WARNING ! ©2002 Maytag Appliances Company 16021518 Rev. 0 21 Splatter Shield Removal NOTE: Be careful not to bend antenna w...
Page 22 - Interlock Switch Assembly Removal
Disassembly Procedures To avoid risk of electrical shock, personal injury, ordeath, disconnect power to oven and dischargecapacitors before following any disassembly procedure. WARNING ! 22 16021518 Rev. 0 ©2002 Maytag Appliances Company New Door Assembly (unit with P13278* manufacturing number) 1. ...
Page 23 - Magnetron Removal
Disassembly Procedures To avoid risk of electrical shock, personal injury, ordeath, disconnect power to oven and dischargecapacitors before following any disassembly procedure. WARNING ! ©2002 Maytag Appliances Company 16021518 Rev. 0 23 Removal of Power Transformer, Capacitorand Diode (Rectifier) 1...
Page 24 - Oven Cavity Thermal Cut-Out; Oven Tray Replacement
Disassembly Procedures To avoid risk of electrical shock, personal injury, ordeath, disconnect power to oven and dischargecapacitors before following any disassembly procedure. WARNING ! 24 16021518 Rev. 0 ©2002 Maytag Appliances Company Magnetron Tube Thermal Cut-OutReplacement 1. Disconnect power ...
Page 25 - Removal of Line Filter; Fuse Block
Disassembly Procedures To avoid risk of electrical shock, personal injury, ordeath, disconnect power to oven and dischargecapacitors before following any disassembly procedure. WARNING ! ©2002 Maytag Appliances Company 16021518 Rev. 0 25 Removal of Line Filter WARNING ! This unit must be unplugged t...
Page 26 - Appendix A
©2002 Maytag Appliances Company A–1 16021518 Rev. 0 Appendix A
Page 28 - IMPORTANT SAFETY INSTRUCTIONS; Recognize this symbol as a SAFETY message; SAVE THESE INSTRUCTIONS
©2002 Maytag Appliances Company A–3 16021518 Rev. 0 IMPORTANT SAFETY INSTRUCTIONS Recognize this symbol as a SAFETY message SAVE THESE INSTRUCTIONS 1. READ all instructions before using oven. 2. READ AND FOLLOW the specific“PRECAUTIONS TO AVOID POSSIBLEEXPOSURE TO EXCESSIVE MICROWAVEENERGY” on page ...
Page 29 - PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO
16021518 Rev. 0 A–4 ©2002 Maytag Appliances Company SAVE THESE INSTRUCTIONS 1. Briskly stir or pour liquids before cooking withmicrowave energy to prevent spontaneousboiling or eruption. Do not overheat. If air is notmixed into a liquid, liquid can erupt in oven orafter removal from oven. 2. Do not ...
Page 30 - MESURES DE SECURITE IMPORTANTES; Ce symbole signale un message de SECURITE; CONSERVER CES INSTRUCTIONS
©2002 Maytag Appliances Company A–5 16021518 Rev. 0 MESURES DE SECURITE IMPORTANTES Ce symbole signale un message de SECURITE CONSERVER CES INSTRUCTIONS 1. LIRE la totalité des instructions avant d’utiliserle four. 2. LIRE ET SUIVRE les PRECAUTIONS CONTRELES RISQUES D’EXPOSITION A UN EXCES DEMICRO-O...
Page 31 - PRECAUTIONS CONTRE LES RISQUES; ATTENTION
16021518 Rev. 0 A–6 ©2002 Maytag Appliances Company MESURES DE SECURITE IMPORTANTES 1. Pour éviter toute ébullition ou éruptionspontanée, remuer vigoureusement ou verserles liquides avant de les chauffer au four àmicro-ondes. Ne pas trop chauffer. Si de l’airn’a pas été incorporé dans le liquide, ce...
Page 32 - Installation; Unpacking Oven
©2002 Maytag Appliances Company A–7 16021518 Rev. 0 Installation Unpacking Oven • Inspect oven for damage such as dents in door or inside oven cavity. • Report any dents or breakage to source of purchase immediately.Do not attempt to use oven if damaged. • Remove all materials from oven interior. • ...
Page 33 - Display and Features; Display; Oven Display; Cooking Display
A–8 16021518 Rev. 0 ©2002 Maytag Appliances Company Display and Features Display Some items in the display can be seen butare not available depending on model. Ready Ready displays when an oven controlwill accept entries. Cooking Displays 25:20 displays total cooking time. Whenmore than one cooking ...
Page 34 - Using the Oven Control; Manual Time Entr y; Factory Settings
©2002 Maytag Appliances Company A–9 16021518 Rev. 0 Using the Oven Control (Electronic Control) Manual Time Entr y To cook food using a specific entered time and power level. 1. Open oven door and place food in oven. Close door.• READY displays. Fan and light will turn on. 2. Press TIME ENTRY pad. •...
Page 35 - Programming Pads; Programming Multiple Stages
16021518 Rev. 0 A–10 ©2002 Maytag Appliances Company Programming Pads Oven is shipped from the factory for single pad programming. To changethe oven default to allow double pad programming, see User Option section. To change the amount of time or the power level for a preset pad: 1. Open oven door.•...
Page 36 - User Options; Changing user options; Didn’t like an option?
©2002 Maytag Appliances Company A–11 16021518 Rev. 0 User Options (Electronic Control) Changing user options Options such as single or double pad programming, beep volume, andmaximum cooking time can be changed to suit individual preferences. To change options: 1. Open oven door.• If door is closed ...
Page 37 - Care and Cleaning; Replacing Oven Light
16021518 Rev. 0 A–12 ©2002 Maytag Appliances Company Care and Cleaning Replacing Oven Light 1. Disconnect electrical supply. 2. Remove screw from back of oven. 3. While wearing protective gloves,turn light bulb counterclockwise toremove. 4. Replace light bulb with 230-volt,25-watt appliance bulb. Do...
Page 38 - Before Calling for Service; Record all inspections and repair for future reference.
©2002 Maytag Appliances Company A–13 16021518 Rev. 0 Before Calling for Service Record all inspections and repair for future reference. WARNING ! To avoid electrical shock which can cause severe personal injury or death, do not remove outer case at any time.Only an authorized servicer should remove ...
