Amana HWK03E- User Manual
Amana HWK03E– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
a
ccessories
Wall Sleeves
All our wall sleeves have industry standard dimensions of 42” wide
x 16¹/16” high. All Stonewood Beige G-90 metal wall sleeves are
thermally insulated and include a weather board for use during
construction. The WS900D, SC and INTERNAL 14⅛” depth is the
industry standard. Sleeves may be shipped separately to allow for
installation during construction.
Custom Color Sleeves
We offer over 150 different custom colors to choose from for your wall
sleeves. In addition, we can custom paint the exterior a different color
from the interior to meet your needs.
Standard Depth Sleeves
WS900E
Standard PTAC sleeve
WS900SC
Seacoast triple protected
WS900D-
INTERNAL
Internal drain only for
window-wall installations
(DK900D sold separately)
Extra Deep Sleeves
We offer sleeves in several depths for thicker
wall installations or special room configurations
WS9xxD1
16” to 24” in 1”
increments
WS928D1
Extra deep 28”
WS930D1
Extra deep 30”
WS936D1
Extra deep 36”
14⅛"
42"
16
1
/
16
"
Outdoor Grilles
Available in stamped-aluminum or architecturally louvered for
application with an Amana brand WS900D wall sleeve.
AGK—Extruded aluminum architectural grille available with anod
-
ized aluminum finish and a baked-on paint finish for durabil
-
ity. Choose from 3 stock colors or a custom color to blend
with your building’s exterior color scheme.
CB (Clear Anodized),
DB (Dark Brown/Bronze),
TB (Stonewood Beige), WB (White), SB (Special/Custom Colors)
PGK—One-piece injection molded grille using a polymer blend of
engineered thermoplastic high-impact strength material with
chemical resistance and an exterior UV protective coating.
Choose from 3 stock colors:
DB (Dark Brown/Bronze), TB (Stonewood Beige), WB (White)
Standard Outdoor Grille
SGK01B
Single Pack
SGK01TB
Stonewood Beige
Architectural Outdoor Grille
AGK01CB
Anodized Aluminum
(Silver)
AGK01DB
Dark Bronze/Brown
AGK01TB
Stonewood Beige
AGK01WB
Amana White
AGK01SB
Custom Colors
PGK01DB
Dark Bronze/Brown
PGK01TB
Stonewood Beige
PGK01TB
Amana White
AGK
or
PGK
SGK
Condensate Drain Kit
Attaches to the wall sleeve base pan for controlled internal or external
disposal of condensate.
DK900D
Condensate Drain Kit
(use with WS900E)
DK9001D
Condensate Drain Kit
(use with WS900B)
DK900D
Low-Voltage Wire Harness Kit
For quick connections of the remote, or wired, thermostats, wired
EMS, or front desk with jumpers and connectors.
PWHK01C
Wire Harness Kit
Remote Escutcheon Kit (not shown)
Optional kit for use with units controlled via a wired, remote
thermostat. Covers control touch-pad for wired thermostat
installations.
REK10B
Remote Escutcheon Kit
(10-pack)
Each kit contains 80 wires and wire nuts, enough to attach a
thermostat and one additional accessory to 10 PTAC units.
Wires come in assorted colors for easy attachment.
Sub-base Kit
The fully skirted sub-base conceals wiring while providing strong
support, if needed. Plug-in receptacle and field-wiring access speeds
installation. Electrical accessories, such as fuse holders, circuit
breakers and disconnect switches, meet N.E.C. requirements.
PTSB320E
230/208V 15/20A
PTSB330E
230/208V 30A
PTSB420E
265V 15/20A
PTSB430E
265V 25A
PTSB000E
Non-electrical
Skirting
Skirting
Leveling Legs
Optional
Fuse Holder
Location
Optional
Power Switch and Circuit Breaker
Location
Power Receptacle
Subbase Box Assembly
Leveling Legs
Gives wall sleeve front support and helps to level the unit for
installation.
LL2B
Leveling legs for
WS9** sleeves
www.roomaire.com
1-800-891-4729
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
