Aluratek APS02F - Manual

Pairing (Wireless connection)

Please make sure the device supports A2DP profile. The

pairing procedure will vary depending on the actual device.

Please refer to the user guide of your device for detail

instruction. The general pairing procedures are as follows:

1. Turn the switch to BT. The blue LED at the base will

start flashing.

2. Activate your device’s Bluetooth function and set your

device to search for Bluetooth devices. Select APS02F

when it is found.

2W Adjustable

Speaker

Mini USB port

LED

Listening to Music (Wired connection)

1. Unwind the connector cable from around the speaker

2. Connect any digital device with a 3.5mm audio jack

port like an iPod, iPad, iPhone, smartphones and tablets

3. Turn the speaker to LINE. The blue LED will illuminate

4. Press play from your connected device and enjoy!

Product Highlights

Tech Support & Warranty Information

Operation

Radio and TV Interference Statement

Bluetooth Portable Mini Speaker

Quick Start Guide

qsg Q10280 v2

Copyright © 2013 Aluratek, Inc. All Rights Reserved.

aluratek.com

APS02F

For more information, please visit:

http://aluratek.com/warranty-return-policy

You can register your product online at:

http://aluratek.com/product-registration

E-mail:

[email protected]

Web:

www.aluratek.com/support

Local (Tustin, CA):

714-586-8730

Toll free:

1-866-580-1978

Aluratek warrants this product against defect in material or workmanship
for

1 Year

from the date of purchase.

If you need further assistance, please contact the Aluratek support
department for troubleshooting prior to returning this device.

WARNING!!! This equipment has been tested and found to comply with the
limits of a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by whatever measures may be required to correct
the interference.

3. After connecting successfully, the blue LED will flash

once every 3 seconds

Note: Please make sure the audio output is set to Bluetooth /

APS02F for audio streaming from the device.

Charging the battery

1. Connect the provided USB charging cable to the mini

USB port on the speaker.

2. Connect to a USB port on your computer or laptop

3. While charging, the power indicator LED will turn red.

4. When fully charged, the power indicator will turn off.

Line, Off,

BT Switch

3.5mm

connector