Aluratek ABS03F - Manual

Bluetooth Wireless Speaker

qsg Q10265

Copyright © 2012 Aluratek, Inc. All Rights Reserved.

aluratek.com

Quick Start Guide

ABS03F

Product Application

Operation

Note: The pairing mode will last for 3 minutes. If the pairing failed within 3 minutes, the system will

search for the last paired device and the blue LED will flash slowly. To restart the pairing process,

turn off the speaker and power on again.

Pairing with the transmitter such as iPhone, smart phone, and tablet:

The pairing procedure will vary depending on the actual device. Please refer to the

user guide of your device for detail instruction. The general pairing procedures are

as follows:

1. Make sure ABS03F is turned ON.

2. ABS03F will enter pairing mode automatically after 10 seconds.

(you will hear 3 audio tones and the blue LED will flash rapidly)

3. Activate your device’s Bluetooth function and set your device to search for Bluetooth

devices. Select ABS03F when it is found.

4. For transmitter with Bluetooth version 2.1, you will not need to input a code. If you

are prompted for PIN, please enter “0000”.

5. If prompted by your device to connect, please select “Yes”.

6. After connecting successfully, the blue LED will flash every 3 seconds.

Note: Please make sure the audio output is set to Bluetooth / ABS03F for audio streaming from the device.

For more information, please visit:

http://aluratek.com/warranty-return-policy

You can register your product online at:

http://aluratek.com/product-registration

E-mail:

[email protected]

Web:

www.aluratek.com/support

Local (Tustin, CA):

714-586-8730

Toll free:

1-866-580-1978

Aluratek warrants this product against defect in material or workmanship for

1 Year

from the date of purchase.

If you need further assistance, please contact the Aluratek support department for

troubleshooting prior to returning this device.

Tech Support & Warranty Information

Operation

Charging the battery

The battery is not fully charged and it is highly recommended that you charge ABS03F

before you begin using it.

Note: Using ABS03F “out of the box” will not harm the device. You will experience reduced battery

life as the unit will not be fully charged.

Connect the larger USB end of the cable provided to your PC / power adapter.

Connect the smaller USB end to charging port of ABS03F. Please charge the battery

for a minimum of (4) hours. The Red LED will be on while charging. When charging

is complete, the red LED will turn off.

Function

Operation

Volume +

Press for 1 second to advance to next song. Press and hold to

increase the volume.

Radio and TV Interference Statement

WARNING!!! This equipment has been tested and found to comply with the limits of a

Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by whatever measures may be

required to correct the interference.

Speaker controls and LED

Charge the built-in

lithium ion battery

with the included

USB cable

On - Off switch

Connect any MP3

Player with a

3.5mm auxiliary

audio output

Speaker - 3W sound output

Skid free base

Press for 1 second to advance to previous song. Press and hold

to decrease the volume.

Volume -