Altronix ACM8 - Installation Manual
Altronix ACM8 Power Supply – Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – ACM8 & ACM8CB Series Configuration Reference Chart:; amp; UL Listed for Access Control
- Page 3 – Installation Instructions:; Terminal Identification Table; Output options
- Page 4 – Jumper J3 must be cut; FACP Dry form “C” output; Typical Application Diagram:; FACP Interface Enabled; FACP Dry
- Page 5 – ACM8 & ACM8CB Access Power Controller; Terminal Identification Tables:
ACM8 & ACM8CB
Access Power Controllers
Installation Guide
Models Include:
•
ACM8
•
ACM8E
-
Fused Outputs
-
Fused Outputs
•
ACM8CBE
•
ACM8CB
-
PTC Outputs
-
PTC Outputs
Rev. 092503
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Altronix
- Model
- ACM8
- Document type
- Installation Manual
- Category
- Power Supply
- Language(s)
- English
- Pages
- 8
- Format
Summary
Overview: These units convert one (1) 12 to 24 volt AC or DC input into eight (8) independently controlled fused or PTC protectedoutputs. These power outputs can be converted to dry form “C” contacts (ACM8 & ACM8E only). Outputs are activatedby an open collector sink or normally open (NO) dry tr...
Installation Instructions: 1. Mount unit in desired location/enclosure. Carefully review:Typical Application Diagram (pg. 4) Terminal Identification Table (pg. 5) LED Diagnostics (pg. 5) Hook-up Diagrams (pg. 6) 2. Power supply input: The units can be powered with one (1) power supply which will pro...
Jumper J3 must be cut (Fig. 3, pg. 6) . 6. FACP Dry form “C” output (Fig. 1A, pg. 4) : Connect desired device to be triggered by the unit’s dry contact output to the terminals marked [NO] and [C] FACP for normally open output or the terminals marked [NC] and [C] FACP for normally closed output. Typi...