Altinex SW104-130 - Manual - manualsarea.com

Page 2 - SWITCHER; TABLE OF CONTENTS

SWITCHER 400-0426-006 1 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ................ 2 GENERAL .......................................................... 2 INSTALLATION.................................................. 2 CLEANING......................................................... 2 FC...

Page 3 - PRECAUTIONS / SAFETY WARNINGS

SWITCHER 400-0426-006 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your SW104-130 Switcher. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your SW104-130 and to prevent fire and shock hazards. Please read them...

Page 4 - TECHNICAL SPECIFICATIONS; Inputs

SWITCHER 400-0426-006 3 ABOUT YOUR SW104-130 2 SW104-130 2-In Video+ Audio to TP Output, Auto-Switcher/Transmitterwith Local Output The SW104-130 Auto-Switcher is designed to switch between two video+ audio sources. The selected source is converted and transmitted using ALTINEX’s Twisted Pair standa...

Page 5 - Mechanical

SWITCHER 400-0426-006 4 MECHANICAL SW104-130 Material 0.091 in Al Finish Black Height 0.960 in (24 mm) Width 4.300 in (109 mm) Depth 5.200 in (132 mm) Weight 1.00 lb (0.45 kg) T ° Operating 10 ° C-35 ° C T ° Maximum 50 ° C Humidity 90 % non-condensing MTBF (calculations) 40,000 hrs (min.) Table 2. S...

Page 6 - PRODUCT DESCRIPTION; DIAGRAM 1: TYPICAL SETUP

SWITCHER 400-0426-006 5 PRODUCT DESCRIPTION 4 APPLICATION DIAGRAMS 5 DIAGRAM 1: TYPICAL SETUP MONITOR OUTPUT VIDEO CONTACT CONTROL OUTPUT POWER COMPONENT INPUT1 AUDIO INPUT1 INPUT2 AUDIO LOCAL AUDIO LOCAL 4TP MAIN EQUALIZATION SWITCH CLOSURE COMPUTER/ COMPUTER/ COMPONENT INPUT2 VIDEO VIDEO SW104-130...

Page 7 - DIAGRAM 2: INTERNAL VIEW

SWITCHER 400-0426-006 6 DIAGRAM 2: INTERNAL VIEW SW 104-130 CONTROL CH2 CH1 POWER CONTROL CONTROL SWITCH PLUG AND PLAY HOR VER EQ H/W VER HOR RED BLUE GREEN CONTROL PAIR 4 RIGHT LEFT RIGHT LEFT PS RED BLUE GREEN PAIR 2 PAIR 3 PAIR 1 RED BLUE GREEN VER HOR PLUG AND PLAY POWER 2.5 mm 9V,1A COMPUTER/ C...

Page 8 - OPERATION; VIDEO EQUALIZATION

SWITCHER 400-0426-006 7 INSTALLING YOUR SW104-130 6 Step 1. Make sure to use the ALTINEX power adapter supplied with the unit. Connect the power adapter to the power port. The Power and Input 2 LEDs should turn on. NOTE: Input 2 is the default if there is no signal on Input 1 and the Control Switch ...

Page 9 - TROUBLESHOOTING GUIDE; like to offer the following suggestions:; The source has a problem.

SWITCHER 400-0426-006 8 TROUBLESHOOTING GUIDE 8 We have carefully tested and found no problems in the supplied SW104-130 unit. However, we would like to offer the following suggestions: 8.1 LEDs ARE OFF Cause 1: The power adapter is installed wrong. Solution 1: Make sure the adapter output is connec...

Page 10 - Signal is bad or missing.; ALTINEX POLICIES; Please see the ALTINEX website at; CONTACT INFORMATION

SWITCHER 400-0426-006 9 Cause 3: Signal is bad or missing. Solution 1: Make sure the switcher output is connected to the monitor. If there is still no display, see Solution 2. Solution 2: Remove both inputs to the switcher and connect the active signal from the source to Input 2. If there is still n...

Altinex SW104-130 - Manual

Table of Contents:

Summary

Other Altinex Models