Altinex MT115-111 - Manual - manualsarea.com

Page 2 - MULTITASKER

MULTITASKER 400-0443-004 1 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ................ 2 GENERAL .......................................................... 2 HANDLING ........................................................ 2 CLEANING...........................................................

Page 3 - PRECAUTIONS / SAFETY WARNINGS

MULTITASKER 400-0443-004 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MT115-111 and keep it handy for future reference. These safety instructions are to ensure the long life of your MT115-111 and to prevent fire and shock hazards. Please read them carefully a...

Page 4 - TECHNICAL SPECIFICATIONS; Inputs

MULTITASKER 400-0443-004 3 ABOUT YOUR MT115-111 2 MT115-111 Dual Twisted Pair Receiver to Computer/Component Video+ Audio, The MT115-111 provides a means of receiving computer or component video and audio signals over Twisted Pair-type (CAT-5) cable when used together with an ALTINEX Twisted Pair Vi...

Page 5 - ELECTRICAL

MULTITASKER 400-0443-004 4 ELECTRICAL MT115-111 Input Signal CAT-5/6 Twisted Pair Video/Sync/Audio Signals ALTINEX Standard Audio Output Signal Gain 0 dB +/- 0.5 dB Level 1.0 Vp-p max Video Output Signal Video Signal 1.0 Vp-p max Video Impedance 75 ohm SYNC Signal TTL (+/-) Video Resolutions VGA thr...

Page 6 - PRODUCT DESCRIPTION

Page 7 - APPLICATION DIAGRAMS; DIAGRAM 1: TYPICAL SETUP

MULTITASKER 400-0443-004 6 APPLICATION DIAGRAMS 5 DIAGRAM 1: TYPICAL SETUP MT115-111 TP115-110 TP115-110

Page 8 - DIAGRAM 2: INTERNAL VIEW

MULTITASKER 400-0443-004 7 DIAGRAM 2: INTERNAL VIEW PAIR 1 PAIR 3 EQ S/W EQ H/W PAIR 2 PAIR 4 EQ S/W H/W EQ PAIR 1 PAIR 3 PAIR 2 PAIR 4 SEPARATOR G/Y B/Pb R/Pr H V R/Pr G/Y B/Pb H V CH2 POWER PS MP CH1 DETECT SIGNAL POWER INPUT 1 4TP VIDEO 15-PIN HD YPbPr RGBHV RGBHV/ YPbPr VIDEO 15-PIN HD RJ-45 4TP...

Page 9 - DIAGRAM 3: SWITCH SETTINGS; Equalization; CONTROL

MULTITASKER 400-0443-004 8 DIAGRAM 3: SWITCH SETTINGS SOG1 SW8 GAIN2 SW6 GAIN1 SW3 SOG2 SW7 EQ2 EQ1 SW4 SW1 Set SW6 to SW for software or HW for a fixed gain = 1.Set SW8 to SW for software or HW for a fixed gain = 1. Set SW4 to SW for software or HW for hardware.Set SW2 to SW for software or HW for ...

Page 10 - OPERATION; Use uppercase letters for all commands.

MULTITASKER 400-0443-004 9 INSTALLING YOUR MT115-111 6 Step 1. Determine the appropriate switch settings using DIAGRAM 3 on page 8. Step 2. Turn off power to the MultiTasker system and disconnect from AC power. Step 3. Remove an unused slot cover (MT200-101). Identify the slot number and note that i...

Page 11 - DESCRIPTION OF COMMANDS

MULTITASKER 400-0443-004 10 7.2 DESCRIPTION OF COMMANDS Each command consists of three parts: Function, Card ID, and Unit ID. [ Function , Card ID , Unit ID ] Example: [VERC3U2] VER = Function C3 = Card ID or Group ID U2 = Unit ID (optional for Unit ID 0) For Function, see a detailed explanation und...

Page 15 - ID COMMANDS

MULTITASKER 400-0443-004 14 16. [GAIN=] This command sets the gain level for an input to a value specified by the user. A gain setting of 4 is equivalent to unity gain. Command Format: [GAINm=xCn] m = Input # (m = 1 or 2) x = Gain level (m = # from 1 to 11, 4 = unity) Cn = Card ID (n = slot # from 1...

Page 17 - This command deletes one or all groups.

MULTITASKER 400-0443-004 16 24. [RMG] This command deletes one or all groups. Command Format: [RMGk] Gk = Group ID (k = # from 1-8, * for all) Example: Remove all cards from G52 by sending [RMG5]. The system will return the following feedback: [G5=0] Example 2: Remove all cards from all groups, effe...

Page 19 - Following are the menus available to the; along with a brief

MULTITASKER 400-0443-004 18 7.4.4 MT115-111 MENUS Following are the menus available to the MT115-111 . The first menu is the Main Menu only. The second listing is an expanded view of the card’s sub-menus. The expanded menu contains values that indicate the current setting or value of a parameter. Th...

Page 20 - TROUBLESHOOTING GUIDE

MULTITASKER 400-0443-004 19 7.4.5 MENU MODE EXAMPLES All Menu Mode examples assume an MT115-111 is installed in slot 4 of unit ID 1. NOTE: The communication software you use may echo each character as it is typed when entering numeric values (not selecting menu items). For example, entering a value ...

Page 21 - The source has a problem.; Bypass the; Cable connections are incorrect.; ALTINEX POLICIES; Please see the ALTINEX website at; CONTACT INFORMATION

MULTITASKER 400-0443-004 20 8.3 NO DISPLAY Cause 1: The source has a problem. Solution: Check the source and make sure that there is a signal present and all source connections are correct. If the source is working and there is still no display, see Cause 2. Cause 2: Signal is bad or missing. Soluti...

Altinex MT115-111 - Manual

Table of Contents:

Summary

Other Altinex Models