Altinex MT113-102/103 - Manual

Page 2 - MULTI-TASKER; TABLE OF CONTENTS

MULTI-TASKER 2 2 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS .............. 3 GENERAL ......................................................... 3 CLEANING ........................................................ 3 FCC / CE NOTICE............................................. 3 ABOUT YOUR MT1...

Page 3 - PRECAUTIONS / SAFETY WARNINGS

MULTI-TASKER 3 3 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MT113-102/103 . Keep this manual handy for future reference. These safety instructions are to ensurethe long life of your MT113-102/103 and to prevent fire and shock hazard. Please read them carefull...

Page 4 - TECHNICAL SPECIFICATIONS; Outputs; MECHANICAL; ELECTRICAL

MULTI-TASKER 4 4 ABOUT YOUR MT113-102/103 2 MT113-102/103 - 3 in Mixer, 1 fixed linelevel output and 10W amplifier Card The MT113-102/101 is a Stereo Audio Power Amplifier Card designed for use with theMultiTasker™. When installed in the BasicEnclosure (MT100-100), This card allowsconnection of up t...

Page 6 - APPLICATION DIAGRAM; Application Diagrams

MULTI-TASKER 6 6 APPLICATION DIAGRAM 5 Application Diagrams MT113-102 Application Diagram MT113-103 Application Diagram

Page 8 - OPERATION; Use uppercase letters for all commands.

MULTI-TASKER 8 8 INSTALLING YOUR MT113-102/103 6 Step 1. Slide the MT113-102/103 into an available slot in the Multi-Tasker™ Basic Enclosurein order to connect to the bus. Make surethat the MT113-102/103 card fits into place. Secure the card to the Multi-Tasker™ by tightening the retainerscrews loca...

Page 9 - DESCRIPTION OF COMMANDS

MULTI-TASKER 9 9 7.2 DESCRIPTION OF COMMANDS Each command consists of three parts: function,card ID, and unit ID. [Function, Card ID, Unit ID] Example: [VERC3U2]VER = FunctionC3 = Card IDU2 = Unit ID For detailed information regarding function, seeeach command description. Card ID is an assigned val...

Page 14 - will return feedback as; XX

MULTI-TASKER 14 14 To clear all groups of unit 1, send the[CLR GU1] command. 17. [GkUi] This command is used to request group data.With the command, the user can identify whichinput or output of a particular group is on.Command Format: [GkUi]k = group number (k = # from 1-9)i = unit number (i = # fr...

Page 15 - TROUBLESHOOTING GUIDE

MULTI-TASKER 15 15 TROUBLESHOOTING GUIDE 8 We have carefully tested and have found noproblems in the supplied MT113-102/103 ; however, we would like to offer suggestions for the following: 8.1 LED IS NOT ON Cause 1 : Card cage is not plugged in. Solution: Plug card cage in. If the LED lights, the pr...

Page 16 - ALTINEX POLICY; Please see the Altinex website at; CONTACT INFORMATION

MULTI-TASKER 16 16 ALTINEX POLICY 9 9.0 LIMITED WARRANTY / RETURN POLICY Please see the Altinex website at www.altinex.com for details on warranty and return policy. 9.1 CONTACT INFORMATION ALTINEX, INC. 592 Apollo Street Brea, CA 92821 USA TEL: 714-990-2300 TOLL FREE: 1-800-ALTINEX WEB: www.altinex...

Altinex MT113-102/103 - Manual

Table of Contents:

Summary

Other Altinex Models