Altinex MT104-102 - Manual - manualsarea.com

Page 2 - MULTI-TASKER; TABLE OF CONTENTS; Page

MULTI-TASKER 1 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ............... 2 GENERAL.......................................................... 2 INSTALLATION ................................................. 2 CLEANING ........................................................ 2 FCC / CE NOTI...

Page 3 - PRECAUTIONS / SAFETY WARNINGS

MULTI-TASKER 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before usingyour MT104-102 . Keep this manual handy for future reference. These safety instructions are toensure the long life of your MT104-102 and to prevent fire and shock hazard. Please read themcarefully and heed a...

Page 4 - TECHNICAL SPECIFICATIONS; MECHANICAL

MULTI-TASKER 3 ABOUT YOUR MT104-102 2 MT104-1026-in 1-out MT VGA Switcher Card The MT104-102 6-in 1-out MT VGA SW Card uses two slots in Multi-Tasker  enclosures. This card enables multiple computer video sources tobe connected and switched to a single scan-ratecompatible display. Resolutions suppo...

Page 5 - PRODUCT DESCRIPTION; Application Diagram 1

MULTI-TASKER 4 PRODUCT DESCRIPTION 4 APPLICATION DIAGRAM 5 Application Diagram 1

Page 6 - Application Diagram 2: Internal View of the MT104-102

MULTI-TASKER 5 Application Diagram 2: Internal View of the MT104-102

Page 7 - OPERATION; Use uppercase letters for all commands.; 00 user’s guide for explanation)

MULTI-TASKER 6 INSTALLING YOUR MT104-102 6 Step 1. Slide the MT104-102 into an available slot in the Multi-Tasker™ Enclosure in order toconnect to the bus. Make sure that the MT104-102 card fits into place. Secure the card to the Multi-Tasker™ bytightening the retainer screws located onthe top and b...

Page 8 - ERROR CODES

MULTI-TASKER 7 Example: If one MT104-102 card is in slot #2 of unit 3: To send command [VERC2U3] , the Multi- Tasker™ Enclosure will return feedback as: MT104-102 690-0158-003 2. [C] This command receives the status of the card. Command Format: [CnUi] Cn = card id (n = 1 to 19)(1-8 for MT100-101 or ...

Page 9 - PF

MULTI-TASKER 8 Example: If there are two MT104-102 cards in slot 6 and 7 of unit 3: To enable input 1 of card 6 and input 3of card 7 simultaneously, use the followingcommands:[ON1C6U3 P ] [ON3C7U3 P ] [SW ] If "F" is included use the [ONmCnUi PF ] command or the [ONmCnUi FP ] command. • [ON…...

Page 10 - will return feedback as

MULTI-TASKER 9 [SW ]The system will return feedback as OK if the unitID is zero. 6. [WR] This command groups multiple cards in theMT100-100 Enclosure. Each unit contains amaximum of nine groups. Command Format: [WRCn…GkUi] n = card ID No. (n = slot # from 1 to 19)(1-8 for MT100-101 or 1-4 for MT100-...

Page 11 - TROUBLESHOOTING GUIDE

MULTI-TASKER 10 7.3. SUMMARY OF COMMANDS 1) [VER]: Receives software version 2) [C]: Receives status of the card 3) [ON]: Turns on one input for a singlecard or a group of cards 4) [OFF]: Turns off one input for a singlecard or a group of cards 5) [SW]: Switch (activates the presetpath) 6) [WR]: Gro...

Page 12 - card and its serial; ALTINEX POLICY; CONTACT INFORMATION

MULTI-TASKER 11 Solution 1: Look at the card and verify that there is no damage. If there is no damage, see Solution 2. Solution 2: Verify that all IC’s are seated in their sockets. If the LED is still blinkingred, see Solution 3. Solution 3: Call ALTINEX at (714) 990-2300. Cause 2: The MT104-102 ca...

Altinex MT104-102 - Manual

Table of Contents:

Summary

Other Altinex Models