Alpine PXI-H990 - Manual - manualsarea.com

Page 3 - Warning

2 -EN GUIDE FOR INSTALLATION AND CONNECTIONS • Please read this GUIDE FOR INSTALLATION AND CONNECTIONS and the OWNER’S MANUAL thoroughly to familiarize yourself with each control and function. We at ALPINE hopethat your new PXI-H990 will give you many years of listening enjoyment.In case of problems...

Page 4 - Caution

3 -EN DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuellines, tanks or electrical wiring. Failure to take such precautions may result in fire. DO NOT USE BOLTS OR NUTS IN THE BR...

Page 5 - Precautions; Wiring Connections

4 -EN Precautions • Be sure to disconnect the cable from the (–) battery post before installing your PXI-H990. This will reduce any chance of damage to the unit in case of a short-circuit. • Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit t...

Page 6 - Contents; PRECAUTIONS; To prevent external noise from entering the audio system.; IMPORTANT; INSTALLATION TECHNICIAN:

5 -EN Contents PRECAUTIONS 2 Accessories 6 Installation 7 Connections 10 Examples of system expansion 12 To prevent external noise from entering the audio system. • Locate the unit and route the leads at least 10 cm away from the car harness.• Keep the battery power leads as far away from other lead...

Page 7 - Accessories

6 -EN Accessories IONBUS cable (6m) DVD Audio Link cable (6m) Microphone (6m) Microphone terminal connec-tion cable (6m) * 1 Hexagonal wrench (M3) Cord clamp x 8 x 4 x 4 Bracket pan head screws(M4 x 8) * 2 Tapping screws (M4 x 14) Bracket * 2 * 1 Used only when setting the microphone built in the mo...

Page 8 - Installation; • Mounting the base unit

7 -EN Installation • Mounting the base unit 1. Decide on the installation location. • The trunk, etc., is the best place. 2. Mark the positions of the mounting screws at the chosen location. 3. Drill 3 mm (1/8”) holes or smaller. WARNING: When making holes, be careful not to damage pipes, tanks, ele...

Page 10 - • Mounting Microphone; Mounting Location

9 -EN 3. Place two base units side by side, and attach the brackets with the supplied bracket pan head screws (M4 x 8). 4. Refer to “Mounting the base unit” on page 7, and firmly attach the base. • Mounting Microphone Mounting Location Mount the microphone on the rear-view mirror, headrest, sun viso...

Page 11 - • Basic Connections Diagram; Connections

10 -EN • Basic Connections Diagram < Top view > Connections ★ Memo FRONT SINGLE REAR DUAL Memo Dolby digital indicator Lights red during Dolby Digital decoding. DTS indicator Lights up red during DTS decoding. LPCM indicator Lights up red when LPCM (MLP Lossless orCD-DA) input. Road EQ Indicat...

Page 13 - Examples of system expansion

12 -EN • PXI-H990 + DVI-9990 Head Unit + External Amplifier + Video etc. Examples of system expansion 12V DVI-9990 FRONT SINGLE REAR DUAL FRONT SINGLE REAR DUAL * 1 * 1 * 1 * 1 * 1 Ferrite Core (See page 6) NOTE • When connecting the Battery power cable direct to the battery terminal, a fuse at the ...

Page 14 - Changer Connected

13 -EN • PXI-H990 + DVI-9990 Head Unit + TMI-M990 Monitor + Ai-NET compatible Changer Connected * 1 Ferrite Core (See page 6). Two pieces are attached to PXI-H990,TMI-M990, KCI-500B. * 2 Only connected when using the TMI-M990 internal Road EQ microphone. Otherwise connect with the microphone (Includ...

Alpine PXI-H990 - Manual

Table of Contents:

Summary

Other Alpine Car Radios Models