Alpine CDM-7856R - Manual

4 -EN Detaching the Front Panel 1 Press and hold the POWER button for at least 3seconds to turn off the power. 2 Press the (Release) button at lower left corner until the front panel pops out. 3 Grasp the left side of the front panel and pull it out. NOTES • The front panel may become hot in normal ...

FR ES DE SE IT 5 -EN Turning Power On and Off 1 Press the POWER button to turn on the unit. NOTE The unit can be turned on by pressing any other buttonexcept the eject c button. The volume level gradually increases to theprevious level you were listening to before theunit was turned off.Press and ho...

6 -EN Basic Operation BAND f UP g DN BASS C. TREBLE C. SETUP 1 2 Setting the Bass Control You can change the Bass Frequency emphasisto create your own tonal preference. 1 Press the BASS C. button to turn on the Basssetting mode. 2-1 Setting the Bass frequency: Press the g DN or f UP button to select...

FR ES DE SE IT 7 -EN 3 Press the BAND button to toggle the modebetween AUX ON and AUX OFF. 4 Press the SETUP button to return to normalmode. 5 To adjust the volume, etc., first press theSOURCE button and select the AUX mode, thenmake the necessary adjustment. → TUNER → CD → AUX NOTE When AUX ON is s...

8 -EN Radio Operations TUNE / A.ME SOURCE F f UP g DN BAND Preset buttons (1 through 6) Manual Tuning 1 Press the SOURCE button to select the radiomode. 2 Press the BAND button repeatedly until thedesired radio band is displayed.Each press changes the band: 3 Press the TUNE button repeatedly until &...

9 -EN Manual Storing of Station Presets 1 Select the radio band and tune in a desired radiostation you wish to store in the preset memory. 2 Press the F button so that the F (Function)indicator light goes out. Then press and hold anyone of the preset buttons (1 through 6) for atleast 2 seconds until...

10 -EN Setting RDS Reception Mode andReceiving RDS Stations The RDS (Radio Data System) is a radioinformation system using the 57 kHz subcarrierof regular FM broadcast. The RDS allows you toreceive a variety of information such as trafficinformation, station names, and to automaticallyre-tune to a s...

11 -EN Receiving RDS Regional (Local) Stations 1 Press and hold the SETUP button for at least 3seconds to activate the setting mode. 2 Press the g DN or f UP button to select the REG mode. 3 Press the BAND button to turn on or off the REG(Regional) mode.In the REG OFF mode, the unit automaticallykee...

12 -EN Priority News This function allows you to preset to give priorityto the News programme. You will never miss theNews programme as the unit automatically givespriority to the News programme whenever itbegins broadcasting, and interrupts theprogramme you are currently listening. Thisfeature is f...

13 -EN CD Player Operation Normal Play and Pause 1 Insert a CD. The CD player begins playbackfrom the first track on the disc. The display shows the track number andelapsed time of the track being played. Whenthe last track is played back the player returns tothe first track and begins playback from...

14 -EN M.I.X. F SOURCE - / J TITLE SCAN Preset buttons (1 through 6) CD Player Operation Music Sensor (Skip) 1 Momentarily press the g DN button once during CD play to return to the beginning of thecurrent track. If you wish to access a trackfurther back, repeatedly press until you reach thedesired ...

15 -EN Scanning Programmes 1 Press the SCAN button to activate the Scanmode.The first 10 seconds of each track will be playedback in succession. To stop scanning, press the SCAN button todeactivate the Scan mode. NOTE In case a 6-disc CD changer is connected:Press the F button so that the F (Functio...

16 -EN Informations In Case of Difficulty If you encounter a problem, please review theitems in the following checklist. This guide willhelp you isolate the problem if the unit is at fault.Otherwise, make sure the rest of your system isproperly connected or consult your authorizedAlpine dealer. Basi...

17 -EN Indication for CD Changer • Protective circuit is activated due to high temperature. - The indicator will disappear when the temperature returns to within operation range. • Malfunction in the CD Changer. - Consult your Alpine dealer. Press the magazine eject button and pull out the magazine....

18 -EN Installation and Connections Before installing or connecting the unit, pleaseread the following and pages 2 and 3 of thismanual thoroughly for proper use. Warning MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fireor product damage. USE ONLY IN CARS WITH A ...

19 -EN Lock pin 3 Slide the CDM-7859R/CDM-7858R/CDM-7856Rinto the dashboard. When the unit is in place,make sure the locking pins are fully seated in thedown position. This can be done by pressingfirmly in on the unit while pushing the locking pindown with a small screwdriver. This ensures thatthe u...

20 -EN + ,- . ~ ) ( / : $ & " # 6 8 Rch Sig Gnd Lch Data Ground Data Bus Battery Shield Ground lgnition Power Supply Ground % 1 ! ; A 3 5 9 7 4 2 Installation and Connections Ignition Key Battery CD changer (Sold separately) Speakers Rear orSubwoofers ∗ Rear Left Front Left Front Right Rear ...