Alpine CDA-7864 - Manual

4 -EN Detaching the Front Panel 1 Press the PWR (Power) button for more than 3 seconds to turn off the power. 2 Press the (Release) button at lower left corner until the front panel pops out. 3 Grasp the left side of the front panel and pull itout. NOTES • The front panel may become hot in normal us...

5 -EN Movable display The movable display may be adjusted to 3different angles depending upon user preference. 1 Press the ANGLE 8 or 9 button to adjust the angle of the movable display. NOTES • The display will close a half minute after the ignitionkey is turned to the OFF position. • The adjusted ...

6 -EN Displaying Time 1 Press the CLK (clock) button repeatedly until the time is displayed.Each press changes the modes as follows: Radio mode CD Player/Changer modes NOTE Selecting any tuner or CD function while in the clockpriority mode will interrupt the time displaymomentarily. The function sel...

8 -EN Basic Operation MODE INTLZ/DISP SOURCE A.PROC BLACK OUT TUNE DN g f UP Setting the AUX Mode You can input TV/video sound by connecting anoptional Ai-NET/RCA Interface cable (KCA-121B)to this component. 1 Press and hold the INTLZ button for more than 2 seconds. 2 Press the f UP button repeatedl...

9 -EN Default values BC: 80 HzBW: WIDE1TC: 10.0kHzHP: OFFLP: OFFSUBW (Phase): NOR NOTES • If you turn the battery power OFF, all settings return to factorydefault. • If HP, LP, BC, and TC are all set to ON, depending on the BC andTC settings, you may not be able to reinforce the sound effect. • Exce...

10 -EN Displaying the Title/Text It is possible to display the CD/Station title if thetitle has been previously inputted. For details, seeTitling Disc/Station (page 11). Text information,such as the disc name and the track name, will bedisplayed if playing a CD text compatible disc. 1 Press the TITL...

11 -EN Titling Discs/Stations It is possible to title your favorite CD's or radiostations. 1 Press the TITLE button and select the title display mode.For details, see Displaying the Title/Text (page10). 2 Press and hold the TITLE button for at least 3 seconds. The first character will blink. 3 Rotat...

13 -EN Manual Storing of Station Presets 1 Select the radio band and tune in a desired radiostation you wish to store in the preset memory. 2 Press and hold any one of the Preset buttons (1 through 6) for at least 2 seconds until the station frequency on the display blinks. 3 Press the Preset button...

14 -EN Mono/Stereo Switching 1 Press the "F" button to illuminate the FUNC (Function) indicator. 2 "ST" indicator appears when a stereo FM stationis tuned in. Press the MONO button to switch from stereo to monaural FM reception. This will help in reducingthe noise of weak FM Stereo b...

15 -EN Opening and Closing the Movabledisplay 1 Press the c button. The movable display will open. To close the movable display, press the c button again.The movable display will close. NOTES • Do not apply shock to the movable display when it isopen as it may result in malfunction of the unit. • Th...

16 -EN CD Player Operation SOURCE BAND Disc Select buttons(1 through 6) f UP DN g M.I.X. F RPT SCAN Fast Forward and Backward 1 Press and hold the DN g or f UP button to quickly move backward or forward until youreach the desired section of the track. Repeat Play 1 Press the RPT (Repeat) button to p...

17 -EN Controlling CD Changer (Optional) An optional 6-disc or 12-disc CD Changer may beconnected to the CDA-7965/CDA-7864/CDA-7863/CDA-7862 if it is Ai-NET compatible.With a CD Changer connected to the Ai-NETinput of the CDA-7965/CDA-7864/CDA-7863/CDA-7862, the CD Changer will be controllablefrom t...

18 -EN Remote Control Operation REMOTE CONTROL UNIT RUE-4185 MUTE CD-CHG SOURCE A.PROC ENT BAND PROG PWR VOLUME 1 2345 6 8 7 9! # 8 g Button Radio mode: SEEK (DN) ButtonCD mode: Press the button to go back to thebeginning of the current track. 9 f Button Radio mode: SEEK (UP) ButtonCD mode: Press th...

19 -EN Battery Replacement Applicable battery: Use two "AAA" sized drybatteries or equivalent. 1 Opening the battery coverSlide out the battery cover while firmly pressingoutward. 2 Replacing the batteryPut the batteries in the case observing thepolarities as illustrated. 3 Closing the cover...

20 -EN Information CD CD Player/Changer not functioning. • Out of operating temperature range +50˚C (+120˚F) for CD.- Allow the vehicle's interior (or trunk) temperature to cool. CD playback sound is wavering. • Moisture condensation in the CD Module. - Allow enough time for the condensation to evap...

21 -EN Specifications FM TUNER SECTION Tuning Range 87.7 – 107.9 MHz Mono Usable Sensitivity 9.3 dBf (0.8 µV/75 ohms) 50 dB Quieting Sensitivity 13.5 dBf (1.3 µV/75 ohms) Alternate Channel Selectivity 80 dBSignal-to-Noise Ratio 80 dB Stereo Separation 45 dB Capture Ratio 2.0 dB AM TUNER SECTION Tuni...

22 -EN Installation and Connections Before installing or connecting the unit, pleaseread the following and pages 2 and 3 of thismanual thoroughly for proper use. Warning MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fireor product damage. USE ONLY IN CARS WITH A ...

23 -EN Installation Caution When you install this unit in your car, do not removethe Detachable Front Panel.If the Detachable Front Panel is removed duringinstallation, you might press too hard and warp themetal plate that holds it in place. 1 Remove the Detachable Front Panel (refer to page4). Slid...

24 -EN Installation and Connections Connections ∗ When Subwoofer is set to OFF: Output is from Rear speakers.When Subwoofer is set to ON: Output is from Subwoofer. For details on how to set the Subwoofer to ON/OFF, see "Subwoofer On and Off" on page 7. Rear orSubwoofers ∗ To amplifier or equ...